|
Stephen,
You didn't say where you were cutting from and pasting to...
It sounds like you have broken a rule.
There are rules regarding what objects you can cut and paste and where you can cut and paste them.
You can only cut and paste network (and router) symbols at the IP Internet level.
This means that a network can only be cut and pasted to/from Location containers and the main IP Internet submap. Also, If you have a network defined in location.conf it will also go user plane if you put it where it does not belong. One last thing, Thou shalt not cut and paste to or from a SmartSet.
If you haven't broken any of these rules, call support.
Don Davis
-----Original Message-----
From: Olson, Stephen [mailto:stolson AT state.pa DOT us]
Sent: Wednesday, October 23, 2002 8:40 AM
To: 'nv-l AT lists.tivoli DOT com'
Subject: [nv-l] Cut & pasted objects are user objects
Greetings to all,
I'm using NetView 7.1.2. Just loaded the software and it discovers objects properly. When I cut & paste an object, it has a shadow, which means it is a user object. If I've cut and pasted a network, the network icon shows as a user object, but when I click on the icon and open a submap, the objects are normal.
Any ideas? This is the first time I've used the Windows-based version. I had been using the AIX version and did not have this problem.
Thanks,
Steve Olson
---------------------------------------------------------------------
To unsubscribe, e-mail: nv-l-unsubscribe AT lists.tivoli DOT com
For additional commands, e-mail: nv-l-help AT lists.tivoli DOT com
*NOTE*
This is not an Offical Tivoli Support forum. If you need immediate
assistance from Tivoli please call the IBM Tivoli Software Group
help line at 1-800-TIVOLI8(848-6548)
------------------------------------------------------------------------------
This electronic mail and any files transmitted with it are confidential and are intended solely for the use of individual or entity to whom they are addressed. If you are not the intended recipient or the person responsible for delivering the electronic mail to the intended recipient, be advised that you have received this electronic mail in error and that any use, dissemination, forwarding, printing, or copying of this electronic mail is strictly prohibited. If you have received this electronic mail in error, please immediately notify the sender by return mail.
==============================================================================
| 