RE: [nv-l] netmon problem
2002-07-19 13:57:04
Jason, you do not want to involve Support, but you would have solved it by
now if you had. This is not a support channel.
I will tell you one thing for free: you should be looking in the
netmon.trace file
to see what netmon is doing when it hangs up and dies. You can toggle
tracing
on with 'netmon -M -1' and off with 'netmon -M 0'. If it never starts
talking, then
it is too busy to get the message. In that case, turn it on at startup by
setting it
with daemon configuration.
Reading the netmon.trace is a whole lot more fun than reading the core
report.
Cordially,
Leslie A. Clark
IBM Global Services - Systems Mgmt & Networking
Detroit
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- Re: [nv-l] netmon problem, (continued)
- Re: [nv-l] netmon problem, reamd
- RE: [nv-l] netmon problem, Allison, Jason (JALLISON)
- RE: [nv-l] netmon problem, reamd
- RE: [nv-l] netmon problem, Allison, Jason (JALLISON)
- RE: [nv-l] netmon problem, reamd
- RE: [nv-l] netmon problem, Allison, Jason (JALLISON)
- RE: [nv-l] netmon problem, Allison, Jason (JALLISON)
- RE: [nv-l] netmon problem, Dietmar Gaulhofer
- Re: [nv-l] netmon problem, Todd H.
- RE: [nv-l] netmon problem, Allison, Jason (JALLISON)
- RE: [nv-l] netmon problem,
Leslie Clark <=
- RE: [nv-l] netmon problem, Allison, Jason (JALLISON)
- RE: [nv-l] netmon problem, jshanks
- RE: [nv-l] netmon problem, Oliver Bruchhaeuser
- RE: [nv-l] netmon problem, Oliver Bruchhaeuser
|
|
|