This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
Hi,
As you rightly said that backup isdn line with a status of AdminDown will
also be USER1 ( it should not be critical ).
But, the problem in our case is NetView assigns USER1(7) with pink color
and Critical(4) with red color for the same situation on different routers.
Any idea what could be possible reason and where to look into?
Regards,
Anupam
-----Original Message-----
From: Oliver Bruchhaeuser [mailto:oliver.bruchhaeuser AT de.ibm DOT com]
Sent: Friday, November 09, 2001 7:13 PM
To: IBM NetView Discussion
Subject: Re: [NV-L] ISDN port colour problem through Netview
Tim,
update to NetView 7.1 !
In this version the dormant status of ISDN interfaces is managed correctly.
>From the release notes 7.1:
Monitor ISDN Backup Interfaces
By default, interfaces with an SNMP ifOperStatus of DORMANT are handled
as if the status is NORMAL and the icon status color will be NORMAL.
However, in the special case of ISDN backup lines, when the status is
NORMAL, it usually means the primary line has a problem, and when
DORMANT, the primary line is usually okay. In this case the status
transitions to UP, and DORMANT might indicate the need for operator
intervention.
The following features are intended to help operators handle ISDN backup
lines:
* The status of a backup line in DORMANT state is USER1, otherwise the
status is as usual (NORMAL, DOWN). Note that the backup line with a
status of AdminDown will also be USER1.
* When the status changes to UP (from any state) the event Backup Line is
ACTIVE is sent.
* When the status transitions to DORMANT (from any state, including
AdminDown) the event Backup Line is DORMANT is sent.
Kind regards
Oliver Bruchhaeuser
Tivoli NetView EMEA L2 Support
IBM Deutschland GmbH - ITS Tivoli - Dept. 7977 - Hechtsheimer Str. 2 -
55131 Mainz - Germany
Phone: +49-6131-84-5108 - Fax: +49-6131-84-6585 - email:
bruchhae AT de.ibm DOT com
Need help with Tivoli Software Products?
Ask Tivoli!
http://www.tivoli.com/asktivoli (login with your customer account)
Tim.Uekermann@gec
its-eu.com To: nv-l AT tkg DOT com
Sent by: cc:
owner-nv-l AT tkg DOT co Subject: Re: [NV-L] ISDN
port colour problem through Netview
m
09.11.2001 12:55
Please respond to
IBM NetView
Discussion
Hi,
so far as I know, all ISDN Interfaces are treated as down when inactive.
Pink only shows up when the Port is manually shut down (administratively
shutdown)
We use a solution, where we catch the ISDN traps to operate a "backup icon"
which turns red when ISDN becomes active.
Gruesse - Best regards
Tim Uekermann
European Information Management
GE CompuNet Computer Distribution
Europaring 34-40, 50170 Kerpen, Germany
Phone: +49 (0) 22 73/597-7560, Fax: +49 (0) 22 73/597-186, Mobile:
01728348119
E-Mail : Tim.Uekermann AT gecits-eu DOT com
Visit us on the Internet: http://www.gecits-eu.com
This email is confidential. If you are not the intended recipient,
you must not disclose or use the information contained in it.
If you have received this mail in error, please tell us
immediately by return email and delete the document.
ananda AT bharatpetroleum DOT [email protected] on 09.11.2001 12:38:30
Please respond to nv-l AT tkg DOT com
Sent by: owner-nv-l AT tkg DOT com
To: nv-l AT tkg DOT com
cc:
Subject: [NV-L] ISDN port colour problem through Netview
--------------------------------------------------------------------------
Hi All,
I am having NetView 6.0.2 on AIX 4.3.3.
We are monitoring ISDN ports configured on different cisco routers. ISDN
port has been configures mainly as fall back arrangement.
When these ports are not in use, it goes into inactive stage.
The problem is Netview detects these inactive interface differently on
different routers. In some cases, it shows pink color ( IP status -
User1(7) and in some cases it gives red color ( IP status - Critical(4).
Because of these different behaves, other different related actions are
initiated.
We have checked the configuration for these interfaces on routers and it
appears to be the same.
Has anybody experienced the same problem? What could be the possible
reasons and where to look into?
How NetView treats ISDN/port when in inactive stage ?
Please reply ASAP.
Thanks in advance,
Regards,
Anupam
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
Hi,
As you rightly said that backup isdn line with a status of AdminDown will also be USER1 ( it should not be critical ).
But, the problem in our case is NetView assigns USER1(7) with pink color and Critical(4) with red color for the same situation on different routers.
Any idea what could be possible reason and where to look into?
Regards,
Anupam
-----Original Message-----
From: Oliver Bruchhaeuser [mailto:oliver.bruchhaeuser AT de.ibm DOT com]
Sent: Friday, November 09, 2001 7:13 PM
To: IBM NetView Discussion
Subject: Re: [NV-L] ISDN port colour problem through Netview
Tim,
update to NetView 7.1 !
In this version the dormant status of ISDN interfaces is managed correctly.
From the release notes 7.1:
Monitor ISDN Backup Interfaces
By default, interfaces with an SNMP ifOperStatus of DORMANT are handled
as if the status is NORMAL and the icon status color will be NORMAL.
However, in the special case of ISDN backup lines, when the status is
NORMAL, it usually means the primary line has a problem, and when
DORMANT, the primary line is usually okay. In this case the status
transitions to UP, and DORMANT might indicate the need for operator
intervention.
The following features are intended to help operators handle ISDN backup
lines:
* The status of a backup line in DORMANT state is USER1, otherwise the
status is as usual (NORMAL, DOWN). Note that the backup line with a
status of AdminDown will also be USER1.
* When the status changes to UP (from any state) the event Backup Line is
ACTIVE is sent.
* When the status transitions to DORMANT (from any state, including
AdminDown) the event Backup Line is DORMANT is sent.
Kind regards
Oliver Bruchhaeuser
Tivoli NetView EMEA L2 Support
IBM Deutschland GmbH - ITS Tivoli - Dept. 7977 - Hechtsheimer Str. 2 -
55131 Mainz - Germany
Phone: +49-6131-84-5108 - Fax: +49-6131-84-6585 - email:
bruchhae AT de.ibm DOT com
Need help with Tivoli Software Products?
Ask Tivoli!
http://www.tivoli.com/asktivoli (login with your customer account)
Tim.Uekermann@gec
its-eu.com To: nv-l AT tkg DOT com
Sent by: cc:
owner-nv-l AT tkg DOT co Subject: Re: [NV-L] ISDN port colour problem through Netview
m
09.11.2001 12:55
Please respond to
IBM NetView
Discussion
Hi,
so far as I know, all ISDN Interfaces are treated as down when inactive.
Pink only shows up when the Port is manually shut down (administratively
shutdown)
We use a solution, where we catch the ISDN traps to operate a "backup icon"
which turns red when ISDN becomes active.
Gruesse - Best regards
Tim Uekermann
European Information Management
GE CompuNet Computer Distribution
Europaring 34-40, 50170 Kerpen, Germany
Phone: +49 (0) 22 73/597-7560, Fax: +49 (0) 22 73/597-186, Mobile:
01728348119
E-Mail : Tim.Uekermann AT gecits-eu DOT com
Visit us on the Internet: http://www.gecits-eu.com
This email is confidential. If you are not the intended recipient,
you must not disclose or use the information contained in it.
If you have received this mail in error, please tell us
immediately by return email and delete the document.
ananda AT bharatpetroleum DOT [email protected] on 09.11.2001 12:38:30
Please respond to nv-l AT tkg DOT com
Sent by: owner-nv-l AT tkg DOT com
To: nv-l AT tkg DOT com
cc:
Subject: [NV-L] ISDN port colour problem through Netview
--------------------------------------------------------------------------
Hi All,
I am having NetView 6.0.2 on AIX 4.3.3.
We are monitoring ISDN ports configured on different cisco routers. ISDN
port has been configures mainly as fall back arrangement.
When these ports are not in use, it goes into inactive stage.
The problem is Netview detects these inactive interface differently on
different routers. In some cases, it shows pink color ( IP status -
User1(7) and in some cases it gives red color ( IP status - Critical(4).
Because of these different behaves, other different related actions are
initiated.
We have checked the configuration for these interfaces on routers and it
appears to be the same.
Has anybody experienced the same problem? What could be the possible
reasons and where to look into?
How NetView treats ISDN/port when in inactive stage ?
Please reply ASAP.
Thanks in advance,
Regards,
Anupam
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
| 