Santosh,

yes you can check the status of an interface (either ISDN or anything else)
with a MIB variable :
see in the standard mib-2 part of the tree
(mgmt.mib-2.interfaces.ifTable.ifEntry)

there you can see two variables :

ifAdminStatus
ifOperStatus

the first one (ifAdminStatus) is the desired status of the interface, that
is what is defined in config for that interface,
the second one (ifOperStatus) is the current status of it.

Regards,
Bernard Baudoux
Phone: +32 (0)2/565.24.68
e-mail : bernard.baudoux AT fortisbank DOT com


> -----Original Message-----
> From: z_esm_karekars [SMTP:z_esm_karekars AT bharatpetroleum DOT com]
> Sent: Friday, 03 August, 2001 08:59
> To:   'nv-l AT tkg DOT com'
> Subject:      [NV-L] Backup ISDN link status check
> 
> Hello, 
> 
> I have NetView 6.0.1 on AIX 4.3.3 
> 
> I need to check backup ISDN link status, for the ISDN link provided by
> Service provider timely when my primary Leased Link is up and running.
> 
> How can I check "Layer 1 Status" ACTIVE or DEACTIVATED of the BRI
> Interfaces, Is there any MIB available to check this. 
> 
> Please do reply ASAP. 
> 
> Regards, 
> Santosh 
> 

This email and any attached files are confidential and may be legally 
privileged.
If you are not the intended recipient, any disclosure, reproduction, 
copying, distribution, or other dissemination or use of this communication 
is strictly prohibited.  
If you have received this transmission in error please notify the sender 
immediately and then delete this email.
Email transmission cannot be guaranteed to be secure or error free as 
information could be intercepted, corrupted, lost, destroyed, arrive late or 
incomplete, or contain viruses.  
The sender therefore is in no way liable for any errors or omissions in the 
content of this message, which may arise as a result of email transmission. 
If verification is required, please request a hard copy.