Exactly as Alfred says. However, if you ever move this expression to be
collected by an MLM Threshold table, THEN you will need to take into
account the collection duration.
Cheers,
Jane
REIBENSCHUH Alfred wrote:
> hi !:)since the if*Octets are counters, snmpcollect already gives you
> the right delta values mfG. Alfred Reibenschuh
> INFORMATIONSTECHNOLOGIE AUSTRIA GMBH
> TELEKOMMUNIKATION
> Networkmanagement
> Intranet Info-koordinator
> A-1020 Wien, Lassallestrasse 5
> T: ++43-1-21717-58947
> F: ++43-1-21717-58979
> E: alfred.reibenschuh AT it-austria DOT com
>
> -----Original Message-----
> From: Tsubasa_Kimura AT TIVOLI DOT COM
> [mailto:Tsubasa_Kimura AT TIVOLI DOT COM]
> Sent: Wednesday, November 08, 2000 5:01 PM
> To: nv-l AT tkg DOT com
> Subject: [NV-L] BandwidthUtilHdx statistics in Netview
>
>
>
> List,
>
> The formula in mibexpr.conf is BandwidthUtilHdx =
> (8*100*(IFin+IFout))/IFSpeed. Now, the formula should be a
> percentage but IFin and IFout are both in bytes which get
> converted to bits by multiplying by 8 but IFSpeed in bits
> per second. The result of the division is still in
> seconds with a multiplication of 100 for it to be a
> percentage. So the question is whether we still need to
> divide the formula with the collection duration to get a
> real percentage figure.
>
>
> Thank you,
> Tsubasa
>
--
Tivoli Certified Enterprise Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2000 Jane Curry <jane.curry AT skills-1st.co DOT uk>. All rights
reserved.
Exactly as Alfred says. However, if you ever move this _expression_
to be collected by an MLM Threshold table, THEN you will need to take into
account the collection duration.
Cheers,
Jane
REIBENSCHUH Alfred wrote:
hi
!:)since
the if*Octets are counters, snmpcollect already gives you
the right delta values mfG.
Alfred Reibenschuh
INFORMATIONSTECHNOLOGIE AUSTRIA
GMBH
TELEKOMMUNIKATION
Networkmanagement
Intranet Info-koordinator
A-1020 Wien, Lassallestrasse
5
T: ++43-1-21717-58947
F: ++43-1-21717-58979
E: alfred.reibenschuh AT it-austria DOT com
List,
The formula in mibexpr.conf
is BandwidthUtilHdx = (8*100*(IFin+IFout))/IFSpeed. Now, the formula should
be a percentage but IFin and IFout are both in bytes which get converted
to bits by multiplying by 8 but IFSpeed in bits per second. The result
of the division is still in
seconds with a multiplication of 100 for it to be
a percentage. So the question is whether we still need to divide the formula
with the collection duration to get a real percentage figure.
Thank you,
Tsubasa
--
Tivoli Certified Enterprise Consultant & Instructor
Skills 1st Limited, 2 Cedar Chase, Taplow, Bucks, SL6 0EU, UK
Tel: +44 (0)1628 782565
Copyright (c) 2000 Jane Curry <jane.curry AT skills-1st.co DOT uk>.
All rights reserved.
|