For a device to considered a router it must have two or more interfaces and have
forwarding turned on.
It could also be shown as a gateway if the G flag is turned on in the
oid_to_type for its sysobjectid.
"Rauwers, Laurens" <rauwers AT hitt DOT nl> on 09/18/2000 03:20:34 AM
Please respond to IBM NetView Discussion <nv-l AT tkg DOT com>
To: "'IBM NetView Discussion'" <nv-l AT tkg DOT com>
cc: (bcc: Mike Pearson/Tivoli Systems)
Subject: RE: [NV-L] When is a node a router for NetView
Bernard,
Thanks for your reply.
The value of that MIB item (ipForwarding) is on our machine notForwarding ,
so according to your
reply the node is not a router.
However NetView says it is.
My conclusion is that there must be other (or more) conditions which
determine the type of the node.
The node is connected to two FDDI lan's and one normal lan(hme0).
So my question still exists: what brings NetView to the conclusion that it
is a Router?
Laurens Rauwers
HITT, Holland Institute of Traffic Technology B.V.
P.O. Box 717, 7300 AS Apeldoorn, The Netherlands
Oude Apeldoornseweg 41-45, Bldg Y, 7333 NR Apeldoorn, The Netherlands
Phone: +31 55 543 2588
Fax: +31 55 543 2553
E-mail: rauwers AT hitt DOT nl
World Wide Web: http://www.hitt.nl
> -----Original Message-----
> From: BAUDOUX BERNARD [SMTP:bernard.baudoux AT fortisbank DOT com]
> Sent: Friday, September 15, 2000 5:00 PM
> To: 'IBM NetView Discussion'
> Subject: RE: [NV-L] When is a node a router for NetView
>
> Hello Laurens,
>
> it depends on the value of the variable 'ipForwarding' which is located in
> :
>
> .iso.org.dod.internet.mgmt.mib-2.ip
>
> if its value is 'forwarding' then Netview decides the node is a router.
>
> Regards,
> Bernard Baudoux
> * : 02/56(88).524.68
> * : 1GA2H
> e-mail : bernard.baudoux AT fortisbank DOT com
>
>
> > -----Original Message-----
> > From: Rauwers, Laurens [SMTP:rauwers AT hitt DOT nl]
> > Sent: Friday, 15 September, 2000 15:50
> > To: 'IBM NetView Discussion'
> > Subject: [NV-L] When is a node a router for NetView
> >
> > Hello list,
> > Running NV5.1.2 on Solaris 2.7
> >
> > We have nodes in our system which have the object fields isIPRouter,
> > isConnector, isRouter set to TRUE.
> > The system administrator says that the node is NOT configured as a
> Router.
> >
> > Can someone tell me what brings NetView to the conclusion that it is a
> > Router?
> > I guess it is something in MIB-2, but I can't find what.
> >
> > Thanks in advance.
> >
> > Laurens Rauwers
> >
> > HITT, Holland Institute of Traffic Technology B.V.
> > P.O. Box 717, 7300 AS Apeldoorn, The Netherlands
> > Oude Apeldoornseweg 41-45, Bldg Y, 7333 NR Apeldoorn, The Netherlands
> >
> > Phone: +31 55 543 2588
> > Fax: +31 55 543 2553
> > E-mail: rauwers AT hitt DOT nl
> > World Wide Web: http://www.hitt.nl
> >
> >
> >
> _________________________________________________________________________
> > NV-L List information and Archives: http://www.tkg.com/nv-l
> _________________________________________________________________________
> NV-L List information and Archives: http://www.tkg.com/nv-l
_________________________________________________________________________
NV-L List information and Archives: http://www.tkg.com/nv-l
|
