This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
Hi list
We do have two Cisco 7206 in our network and NetView (V6.0 on AIX 4.3.2) has
trouble discovering them.
Both (10.1.1.4 and 10.1.1.5) are in the seedfile and netmon polls them.
I ran netmon in trace mode and found the following strange entry in
netmon.trace (the following output is from 10.1.1.5):
.//nl_snmpstate.c[1887] : addNodeToTopo(10.1.1.5) failed: Topology OK -- no
error
Using ovobjprint there are some entries...but no "icon" for the 7206
OBJECT: 523
FIELD ID FIELD NAME FIELD VALUE
10 Selection Name
"10.1.1.5:FastEthernet0/0"
100 IP Address "10.1.1.5"
101 IP Subnet Mask "255.255.255.0"
102 IP Status Normal(2)
159 isInterface TRUE
164 isHSRP FALSE
169 isIP TRUE
191 SNMP ifType Ethernet CSMACD(6)
192 SNMP ifPhysAddr "0x0050538A8C00"
193 SNMP ifDescr "FastEthernet0/0"
194 SNMP ifSpeed 100000000
235 TopM Network ID 646
236 TopM Segment ID 732
237 TopM Node ID 524
250 XXMAP Protocol List "IP"
251 XXMAP SAPs Used List 0
OBJECT: 524
FIELD ID FIELD NAME FIELD VALUE
10 Selection Name "10.1.1.5"
11 IP Hostname "10.1.1.5"
57 SNMPAgent Cisco Router(3)
62 vendor cisco Systems(13)
102 IP Status Normal(2)
105 isIPRouter TRUE
142 isNode TRUE
145 isConnector TRUE
146 isBridge FALSE
147 isRouter TRUE
148 isHub FALSE
168 routerSysName "C7206_UL"
169 isIP TRUE
185 isSNMPSupported TRUE
187 SNMP sysDescr "Cisco Internetwork
Operating System Software
IOS (tm) 7200 Software (C7200-IS-M), Version 12.0(6), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Wed 11-Aug-99 09:39 by phanguye"
188 SNMP sysLocation ""
189 SNMP sysContact ""
190 SNMP sysObjectID
"1.3.6.1.4.1.9.1.108"
195 isMLM FALSE
196 isSYSMON FALSE
197 isSIA FALSE
198 isManager FALSE
200 isSLM FALSE
201 isSIAOS2 FALSE
233 TopM Interface Count 104
250 XXMAP Protocol List "IP"
527 IP Name "10.1.1.5"
I cleared the whole database and started from scratch, ran ovtopofix -a,
ovmapcount -a, ovwdbdmap -c, but never saw an icon for one of the 7206.
Does anyone know, what is causing NetView not to show the object? Has
somebody NetView running managing a Cisco 7206? Other users with experiences
with 7206?
Thanks in advance...Andreas
With kind regards / mit freundlichen Gruessen
Andreas Kuffer (System Manager UNIX and Enterprise Management)
Kuoni Travel Ltd.
Dep. TOU
Neue Hard 7
CH-8010 Zuerich
Switzerland
Telefon : + 41 1 277 52 41
Fax : + 41 1 272 52 55
<<< the smile that you send out returns to you >>>
Hi list
We do have two Cisco 7206 in our network and NetView (V6.0 on AIX 4.3.2) has trouble discovering them.
Both (10.1.1.4 and 10.1.1.5) are in the seedfile and netmon polls them.
I ran netmon in trace mode and found the following strange entry in netmon.trace (the following output is from 10.1.1.5):
.//nl_snmpstate.c[1887] : addNodeToTopo(10.1.1.5) failed: Topology OK -- no error
Using ovobjprint there are some entries...but no "icon" for the 7206
OBJECT: 523
FIELD ID FIELD NAME FIELD VALUE
10 Selection Name "10.1.1.5:FastEthernet0/0"
100 IP Address "10.1.1.5"
101 IP Subnet Mask "255.255.255.0"
102 IP Status Normal(2)
159 isInterface TRUE
164 isHSRP FALSE
169 isIP TRUE
191 SNMP ifType Ethernet CSMACD(6)
192 SNMP ifPhysAddr "0x0050538A8C00"
193 SNMP ifDescr "FastEthernet0/0"
194 SNMP ifSpeed 100000000
235 TopM Network ID 646
236 TopM Segment ID 732
237 TopM Node ID 524
250 XXMAP Protocol List "IP"
251 XXMAP SAPs Used List 0
OBJECT: 524
FIELD ID FIELD NAME FIELD VALUE
10 Selection Name "10.1.1.5"
11 IP Hostname "10.1.1.5"
57 SNMPAgent Cisco Router(3)
62 vendor cisco Systems(13)
102 IP Status Normal(2)
105 isIPRouter TRUE
142 isNode TRUE
145 isConnector TRUE
146 isBridge FALSE
147 isRouter TRUE
148 isHub FALSE
168 routerSysName "C7206_UL"
169 isIP TRUE
185 isSNMPSupported TRUE
187 SNMP sysDescr "Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-IS-M), Version 12.0(6), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Wed 11-Aug-99 09:39 by phanguye"
188 SNMP sysLocation ""
189 SNMP sysContact ""
190 SNMP sysObjectID "1.3.6.1.4.1.9.1.108"
195 isMLM FALSE
196 isSYSMON FALSE
197 isSIA FALSE
198 isManager FALSE
200 isSLM FALSE
201 isSIAOS2 FALSE
233 TopM Interface Count 104
250 XXMAP Protocol List "IP"
527 IP Name "10.1.1.5"
I cleared the whole database and started from scratch, ran ovtopofix -a, ovmapcount -a, ovwdbdmap -c, but never saw an icon for one of the 7206.
Does anyone know, what is causing NetView not to show the object? Has somebody NetView running managing a Cisco 7206? Other users with experiences with 7206?
Thanks in advance...Andreas
With kind regards / mit freundlichen Gruessen
Andreas Kuffer (System Manager UNIX and Enterprise Management)
Kuoni Travel Ltd.
Dep. TOU
Neue Hard 7
CH-8010 Zuerich
Switzerland
Telefon : + 41 1 277 52 41
Fax : + 41 1 272 52 55
<<< the smile that you send out returns to you >>>
|