Billy,

        If you don't want to load mib interactively then you can use
following option

        xnmloadmib -load mibfile

        I wrote a small script to load all of the needed Cisco mibs from one
directory. It worked fine. Some CISCO mibs      need to be loaded in a
specific sequence.......Just for your info.

Shailesh Patel

> -----Original Message-----
> From: Clayton, Billy [SMTP:Billy.Clayton AT ps DOT net]
> Sent: Thursday, March 09, 2000 8:18 AM
> To:   'nv-l AT tkg DOT com'
> Subject:      [NV-L] Loading Mibs
> 
> 
> > Can anyone help with the following.
> > 
> > When loading mibs through Options > Load/Unload Mibs > SNMP can anyone
> > tell me how to change the default directory it displays when Load is
> > selected. Reason being I locate my mibs and store them in manufacturer
> sub
> > directories below /usr/OV/snmp_mibs, such as Cisco or Cabletron. The
> > problem is that when you select load it list those mibs available in
> > snmp_mibs directory but not the sub directories below there, so I have
> to
> > copy each mib up a level to be able to load it, or have /snmp_mibs with
> > literally hundreds of files listed, not all of which are obvious to it's
> > origin.
> > 
> > Billy Clayton
> > perot systems* Europe Ltd.
> > +44 (0)7771 797539
> > 
> _________________________________________________________________________
> 
> NV-L List information (unsubscribing, policies, posting, digest version,
> searchable archives): http://www.tkg.com/nv-l