Re: HELP with cisco symbols...

                Hi Gord,

                After reading Leslies reply, be shure you have the right
symbols and oid's !
                There are separate entries for the 75xx routers, being 7505,
7507 and 7513.  The 7000 won't work, because the oid 1.3.6.1.4.1.9.1.8 is
for 7000's only.  The 75xx's have oid's 1.3.6.1.4.1.9.1.48 (for 7505),
1.3.6.1.4.1.9.1.45 (for 7507) and 1.3.6.1.4.1.9.1.46 (for 7513).

                Hope it helps,

                Steven.
                Steven Demets
                1Sgt
                CVILM
                Dept Explo
                Sec WAN
                Tf Bemiltel: 9-2320-6099
                Tf Belgacom: +32 2 2556099
                Fax Bemiltel 9-2400-3777
                Fax Belgacom: +32 2 7013777
                email prive: Steven.Demets AT village.uunet DOT be
<mailto:Steven.Demets AT village.uunet DOT be>
                email werk: Demets.Steven AT army.mil DOT be
<mailto:Demets.Steven AT army.mil DOT be>


                -----Original Message-----
                From:   Gord Michaels [mailto:gord_michaels AT HOTMAIL DOT COM]
                Sent:   dinsdag 18 januari 2000 22:00
                To:     NV-L AT UCSBVM.ucsb DOT edu
                Subject:        HELP with cisco symbols...

                Hello All.

                My env:  Netview 5.1.1, AIX 4.2.1.

                I am having a real problem transferring over the cisco
bitmaps for my Cisco
                7500 routers. I have another Netview box with Ciscoworks
installed. Thus,
                that box automatically has the symbols installed.

                Here is what I have done to date:

                1. I copied over all the 7500.*.m and 7500.*.p files into
the
                /usr/OV/bitmaps/C directory.

                2. I examined the file: /usr/OV/conf/C/oid_to_sym.

                The OID that is asscoiated with my Cisco 7500 sereis routers
is:

                1.3.6.1.4.1.9.1.8

                Here is the present line in the oid_to_sym file:

                1.3.6.1.4.1.9.1.8:Connector:Gateway      # Cisco 7000

                So, as just noted, I have copied over the files and made
them all r--r--r--
                1 bin   bin

                Does anyone know what I do next, or how I am suppose to edit
the oid_to_sym
                file ??? I have tried several things but NO LUCK whatsoever.

                I also did a ovw -config, ovw -verify, ovw -fields.

                After each attempt I highlighted the device and did a Demand
Poll, no change
                in symbol.

                If anyone has ever done this before, your help would be
greatly appreciated.

                Sincerely,

                Gord Michaels.



                ______________________________________________________
                Get Your Private, Free Email at http://www.hotmail.com