You also do NOT need to move over the /usr/OV/snmp_mibs/ directory over to
your other system.  It is sufficient to just move over the other files you
mention.

Another thing that I have noticed is that any implemented changes in your
ftp'd "trapd.conf" file are not made until you "touch" this configuration
via the GUI (i.e., via "xnmtrap").  Thus, after you ftp the trapd.conf file
over, execute "xnmtrap &" and make a change, change back, and then click
"Apply" or "OK".  I don't know why this is the case, but it is true.


Joe Prokott
Network Architect
West Group
phone:  651-687-4536
e-mail: joe.prokott AT westgroup DOT com


-----Original Message-----
From: James Shanks [mailto:James_Shanks AT TIVOLI DOT COM]
Sent: Thursday, January 13, 2000 8:43 AM
To: NV-L AT UCSBVM.UCSB DOT EDU
Subject: Re: snmpv2mib snmpv2mib.bin and trapd.conf


Sure.  We load customer configurations that way all the time.

James Shanks
Tivoli (NetView for UNIX) L3 Support



Gregory Adams <gadams AT US.IBM DOT COM> on 01/13/2000 08:00:47 AM

Please respond to Discussion of IBM NetView and POLYCENTER Manager on
NetView
      <NV-L AT UCSBVM.UCSB DOT EDU>

To:   NV-L AT UCSBVM.UCSB DOT EDU
cc:    (bcc: James Shanks/Tivoli Systems)
Subject:  snmpv2mib snmpv2mib.bin and trapd.conf




Hello all,

I have loaded mibs and added traps on one nv6000 server v5.1.2 AIX and
would like to configure another new NV6000 v5.1.2 AIX server with the same
loaded mibs and traps configuration, would it be possible to copy
/usr/OV/snmp_mibs, /usr/OV/conf/trapd.conf, /usr/OV/conf/snmpv2mib,
/usr/OV/conf/snmpv2mib.bin on to this new server and run with that
configuration ?

Thankyou   Greg Adams