I have noticed that there are several different ID's for NT machines, I have
added at least 4 i think.
So I suggest you take a look at the oid_to_* files.

/Christian

-----Original Message-----
From: Nochta, Zoltan [mailto:nochta AT COOPERATION-MANAGEMENT DOT DE]
Sent: Monday, November 15, 1999 5:02 PM
To: NV-L AT UCSBVM.UCSB DOT EDU <mailto:NV-L AT UCSBVM.UCSB DOT EDU>
Subject: Re: NT machines with SNMP



Hi,
this ID is to define the vendor and the class of the object I think.
Microsoft is present in this file and as I wrote, there are some PCs with
full-infos (MIBs) to netview. I think it should be machine-dependent.

Any other ideas are welcome!

                                Zoltan


> -----Original Message-----
> From: Boyles, Gary P [ mailto:gary.p.boyles AT INTEL DOT COM
<mailto:gary.p.boyles AT INTEL DOT COM> ]
> Sent: Monday, November 15, 1999 4:44 PM
> To: NV-L AT UCSBVM.UCSB DOT EDU <mailto:NV-L AT UCSBVM.UCSB DOT EDU>
> Subject: Re: NT machines with SNMP
>
>
> Zoltan,
> Make sure the sysObjectID for the PCs is known by NetView.  Do this by
> checking for the OID in your \usr\OV\conf\oid_to_typ and
> \usr\OV\conf\C\oid_to_sym.
> files.
>
> Garys
>
> -----Original Message-----
> From: Nochta, Zoltan [ mailto:nochta AT COOPERATION-MANAGEMENT DOT DE
<mailto:nochta AT COOPERATION-MANAGEMENT DOT DE> ]
> Sent: Monday, November 15, 1999 7:06 AM
> To: NV-L AT UCSBVM.UCSB DOT EDU
> Subject: NT machines with SNMP
>
>
>
>
>                         Hi Forumers,
>
>         I'm running Netview on NT.
>         There are a lot of NT Workstations and servers
> running SNMP-Service
> in the network.
>         Some of them are manageble with Netview (I can read the MIB
> Variables), but more than 50% is only visible (as unknown PC) for our
> favourite networkmanagement-system. Has somebody any idea, how to
> prevent/repair it?
>
>         The SNMP-configuration of the PCs is the same.
>
>                         Thanks, Zoltan
>