I'm not certain what level of security you want, but...
If you don't want the maps from your server to be accessible, edit the
/usr/OV/registration/C/webquery.reg file and comment out the webquery
command.  Then select NetView Web Interface -> Restart map server from the
Administer pull-down menu to start the map server only on the GUIs opened to
the maps you want to make accessible.  Check the your NetView
Administration's Guide.
EV

-----Original Message-----
From:   Frantsen Christian [SMTP:cf AT INTERNOC DOT SE]
Sent:   Tuesday, April 06, 1999 11:10 AM
To:     NV-L AT UCSBVM.UCSB DOT EDU
Subject:        Re: Netview Web Server Error

ok .. I had 2 user interfaces running, one as a user and one as root, he
didn't like that =) now it works with the submaps! .. thanks alot.

Now the other question, the login/password when you connect to the webpage..
do i have to run the security portion of netview for that to work or is
there something else i shoulde enable?

/christian

-----Original Message-----
From: Vigil, Ed [mailto:EVigil AT MPTN DOT ORG]
Sent: Tuesday, April 06, 1999 5:04 PM
To: NV-L AT UCSBVM.UCSB DOT EDU
Subject: Re: Netview Web Server Error


You cannot view submaps on the Web if ovw with a map in "read-write" mode is
not available.
EV