Hi All:
  I have a  RISC6K F50 with FDDI, Fast Ethernet & 10 meg Ethernet. I have 
changed the
default gateway from the 10 meg to the FDDI nic. The FDDI connects to a 
gigaswitch
concentrator that also houses the router with the IP address I am using as 
default.
Now, NETMON is detecting  "interface down" alerts frequently on all my routers
interfaces. Shortly after, I see the "interface up" alert and all my router 
icon turn green
again.
 I did run reset_ci after my change. Is there another utility needed?
netstat -nr shows:
 "default                     xxx.xxx.xxx.xx    UG   23    767159    fi0  -  -" 
Where xxx is the IP
address I have specified as the default gateway. Pings & demand poll work fine.
The last entry on the display shows:
 "www.www.ww      yyy.yyy.yyy.yyy.yyy    U   159    771354  fi0  -  -" Where 
www is the
subnet  and yyy is the IP address of my Netview box.
Running:
 NV4.1.2 PTF LVL U453385
AIX 4.2.1.4
Thanks in advance
Gil Irizarry
280 King of Prussia Road
ST. Davids, PA 19087
Phone: (610) 902-3426
INTERNET: IRIZARRG AT LABS.WYETH DOT COM