---

To: pranav_venture AT hotmail DOT com
Subject: RE: [Veritas-bu] Synthetic backups failing with 610
From: ken_zufall AT goodyear DOT com
Date: Wed, 5 Jun 2013 07:35:26 -0400

How often are you running the backups?  If TIR information has dropped off for some reason, it can cause a 610 as well.  They can also be generated if one of the backups has expired (automatically or manually) before the next synthetic is scheduled.

Have you tried taking a new regular full and starting the process again?

Ken Zufall
Operating Systems Administrator
D660C
The Goodyear Tire & Rubber Company
GTN 446.0592 or 330.796.0592




From:        pranav batra <pranav_venture AT hotmail DOT com>
To:        "ken_zufall AT goodyear DOT com" <ken_zufall AT goodyear DOT com>, Veritas <veritas-bu AT mailman.eng.auburn DOT edu>
Date:        06/05/2013 01:32 AM
Subject:        RE: [Veritas-bu] Synthetic backups failing with 610

---

We are only trying to synthesize full and differential. We are not taking cumulative and still backup is failing with 610.

Thanks,
PranavB

---

To: smpt1 AT peppas DOT gr
CC: pranav_venture AT hotmail DOT com; veritas-bu AT mailman.eng.auburn DOT edu
Subject: RE: [Veritas-bu] Synthetic backups failing with 610
From: ken_zufall AT goodyear DOT com
Date: Tue, 4 Jun 2013 10:45:50 -0400

No, that configuration doesn't work either.  You're limited to a single synthetic schedule per policy.

Ken Zufall
Operating Systems Administrator
D660C
The Goodyear Tire & Rubber Company
GTN 446.0592 or 330.796.0592




From:        <smpt1 AT peppas DOT gr>
To:        <ken_zufall AT goodyear DOT com>, <pranav_venture AT hotmail DOT com>
Cc:        <veritas-bu AT mailman.eng.auburn DOT edu>
Date:        06/04/2013 10:15 AM
Subject:        RE: [Veritas-bu] Synthetic backups failing with 610

---

But ,
I think that you can run differential incrementals and synthesize a cumulative  backup.
Then you can use the full and the latest synthetic cumulative and create a new synthetic full.
As you do not mix incremental and cumulative backups you are ok
 
stefanos
 
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of ken_zufall AT goodyear DOT com
Sent: Tuesday, June 04, 2013 2:33 PM
To: pranav_venture AT hotmail DOT com
Cc: veritas-bu AT mailman.eng.auburn DOT edu
Subject: Re: [Veritas-bu] Synthetic backups failing with 610
 
We had a similar problem last year, discovered that the problem--for us, anyways--is that you can't have mixed incrementals when using synthetics.  For example, you can run differential incrementals and synthetic fulls; you can run cumulative incrementals and synthetic fulls; but you cannot run cumulative and differential backups and get successful synthetics.  They will work for a single cycle (seed full, mixed incrementals, synthetic full), but the next time a synthetic is attempted it will fail with a 610.

Took us months to figure that one out and that was working with Symantec support.

Ken Zufall
Operating Systems Administrator
The Goodyear Tire & Rubber Company




From:        pranav batra <pranav_venture AT hotmail DOT com>
To:        Veritas <veritas-bu AT mailman.eng.auburn DOT edu>
Date:        06/04/2013 02:53 AM
Subject:        [Veritas-bu] Synthetic backups failing with 610
Sent by:        veritas-bu-bounces AT mailman.eng.auburn DOT edu




Hello Geeks,

I am here facing issues with synthetic backup.  There are 7-8 windows 2008 clients that are giving me issues with synthetic backup.
The backup is failing with 610.

1: (610) end point terminated with an error

Environment : Master windows 2008 R2 -7.5.0.5
Client 7.5.0.5 -2008R2

We are taking their backups on Pure Disk pool ( We have created MSDP ). All the backups are happening over the WAN and thus we are using synthetic backups for the weekends.


FUll backups runs fine ,incremental runs file ,synthetic also does runs fine but fails after running/writing few Gigs with 610.

1: (610) end point terminated with an error


Not able to get any clue even from Symantec till now.

Any help would be appreciated.
Anyone else faced similar issue before.

Thanks,
PranavB
_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu