I put the Media Generation rule in because when I tried doing the import without it I got the following:

Using EP0128:

11/16/2012 08:23:17 - begin Import

11/16/2012 08:23:18 - started process bptm (pid=8603)

11/16/2012 08:23:21 - started process bptm (pid=8603)

11/16/2012 08:23:21 - mounting EP0128

11/16/2012 08:23:19 - requesting resource EP0128

11/16/2012 08:23:19 - granted resource  EP0128

11/16/2012 08:23:19 - granted resource  HP.ULTRIUM2-SCSI.003

11/16/2012 08:24:02 - mounted EP0128; mount time: 0:00:41

11/16/2012 08:24:02 - Error bptm (pid=8603) Media mounted has media id of 0128L1, but EP0128 was requested.  Must add 0128L1 to Media Manager volume database and retry.

11/16/2012 08:24:03 - Error bpimport (pid=8594) Status = cannot perform specified media import operation.

11/16/2012 08:24:03 - end Import; elapsed time 0:00:46

cannot perform specified media import operation (176)

Using 0128L1:

11/16/2012 08:22:27 - begin Import

11/16/2012 08:22:28 - started process bptm (pid=8236)

11/16/2012 08:22:31 - Error bpimport (pid=8140) Status = requested media id is not assigned to this host in the EMM database.

11/16/2012 08:22:31 - end Import; elapsed time 0:00:04

11/16/2012 08:22:28 - requesting resource 0128L1

11/16/2012 08:22:29 - Error nbjm (pid=20781) NBU status: 95, EMM status: Media does not exist

11/16/2012 08:22:29 - Error nbjm (pid=20781) NBU status: 95, EMM status: Media does not exist

media id is not assigned to this host in the EMM database (95)

Regards,

Patrick Whelan

Senior NetBackup Specialist

Our environment, HP-UX 11-31 currently running one master / media server on NetBackup 6.5.2.  We are running mostly unix / Linux backups and a couple windows b/u’s thrown in for good measure.

 

I’m trying to Import tapes from an old shutdown NetBack instance that also ran on a different unix master and am getting errors during the Phase 1 part of the Import.

 

A Media Inventory shows EP0128 for both Media ID and Barcode.

 

Under Media ID Generation set up entry with Robot 1, Barcode Length = 8 and Media Generation Rule 3:4:5:6:7:8

 

If I use EP0128 for the Import I get the following:

11/16/2012 07:17:43 - begin Import

11/16/2012 07:17:45 - started process bptm (pid=26437)

11/16/2012 07:17:47 - started process bptm (pid=26437)

11/16/2012 07:17:47 - mounting EP0128

11/16/2012 07:17:45 - requesting resource EP0128

11/16/2012 07:17:45 - granted resource  EP0128

11/16/2012 07:17:45 - granted resource  HP.ULTRIUM2-SCSI.002

11/16/2012 07:18:29 - mounted EP0128; mount time: 0:00:42

11/16/2012 07:18:29 - Error bptm (pid=26437) Media mounted has media id of 0128L1, but EP0128 was requested.  Must add 0128L1 to Media Manager volume database and retry.

11/16/2012 07:18:30 - Error bpimport (pid=26422) Status = cannot perform specified media import operation.

11/16/2012 07:18:30 - end Import; elapsed time 0:00:47

cannot perform specified media import operation (176)

 

If I use 0128L1 for the Import I get the following:

1: (95) media id is not assigned to this host in the EMM database

 

Any suggestions as to what I need to do to Import this tape?

 

Thanks in advance.

 

Wayne BeDour

Unix System Administrator

PH: 248-447-1739

Internet: wbedour AT lear DOT com

 

********************** ** LEGAL DISCLAIMER ** **********************   This E-mail message and any attachments may contain legally privileged, confidential or proprietary information. If you are not the intended recipient(s), or the employee or agent responsible for delivery of this message to the intended recipient(s), you are hereby notified that any dissemination, distribution or copying of this E-mail message is strictly prohibited. If you have received this message in error, please immediately notify the sender and delete this E-mail message from your computer.

_______________________________________________

Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu

http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu