Hi,

> The installer only allows me to select 1
> drive out of a possible 6 that are installed in the library?

You need to add your media servers in (that also connect to the other tape 
drives), assuming that is how you have configured your environment, then 
thye should be discovered.

Justin.

On Mon, 18 Jul 2011, Fernando Boveda wrote:

> Hi,
>
> The ACS/LS is necessary if you have more than one backup server that wants to 
> access the Library. If your library is going to be access by only one server 
> is not necessary.
>
> Saludos
> Fernando Boveda
>
> Director
> Uniqs S.A.
> tel: +5411 4711 7755
> cel: +54911 3106 0576
> www.uniqs.com.ar
>
>
>
>
>
> On 18/07/2011, at 11:34, hxman wrote:
>
>> Hello,
>>
>> We are doing a new install using a STK/Sun L180 (SCSI drives) and Netbackup 
>> 7.0. My question, is ACSLS necessary? The installer only allows me to select 
>> 1 drive out of a possible 6 that are installed in the library?
>>
>> Thanks....
>>
>> +----------------------------------------------------------------------
>> |This was sent by hx_101 AT hotmail DOT com via Backup Central.
>> |Forward SPAM to abuse AT backupcentral DOT com.
>> +----------------------------------------------------------------------
>>
>>
>> _______________________________________________
>> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
>> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu