Very useful info.
Is the IBM solution free of charge or you have to pay from the EKM software?
I'm asking about the software, not the implementation.
Thanks
Stefanos
-----Original Message-----
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Len Boyle
Sent: Monday, April 25, 2011 11:11 PM
To: smpt; 'Justin Piszcz'; 'Ulises Rodriguez'
Cc: veritas-bu AT mailman.eng.auburn DOT edu
Subject: Re: [Veritas-bu] LT04 Encryption.
Hello
The IBM library managed code for the 3584 allows one to control the
encryption with volser ranges. We did not want to go that route, so we
control it with netbackup volume pool numbers. The low volume pool numbers
do not trigger the encryption at the tape drive, the higher ones do. So by
assigning vol pool numbers in netbackup one can turn encryption on or not
for a volume pool.
See this doc for more information. I do not know if the other tape vendors
support this.
http://www-03.ibm.com/support/techdocs/atsmastr.nsf/5cb5ed706d254a8186256c71
006d2e0a/3c8fb635ba4c5eb7862572f200177aa9/$FILE/Intro%20of%20ILEP%20V4.pdf
There is also doc you can get from the netbackup support folks
len
-----Original Message-----
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of smpt
Sent: Monday, April 25, 2011 3:50 PM
To: 'Justin Piszcz'; 'Ulises Rodriguez'
Cc: veritas-bu AT mailman.eng.auburn DOT edu
Subject: Re: [Veritas-bu] LT04 Encryption.
Hi,
With NetBackup 7.x you can use 20 key groups (volume pools) with 10 (or 20?)
keys per group.
The big difference is that if you use the library's encryption key manager
you will have all drives encryption enabled at all time.
With NetBackup key manager you can choose what backup will be encrypted.
With both key managers you have to have a good disaster plan. If you lose
your key manager, you will lose your backups.
-----Original Message-----
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Justin
Piszcz
Sent: Monday, April 25, 2011 10:09 PM
To: Ulises Rodriguez
Cc: 'veritas-bu AT mailman.eng.auburn DOT edu'
Subject: Re: [Veritas-bu] LT04 Encryption.
On Mon, 25 Apr 2011, Ulises Rodriguez wrote:
> All,
>
> What is the best way to implement encryption for tape with LT04 tape
drives. I have seen that some of you are using KMS. Is this the best
method? I need to make sure that my tapes are encrypted with 3DES. Is the
KMS function included with NBU 6.5.5 in Windows 2003 64 bit?
>
> My current encryption device is coming to end of life. This is the
> main
reason I need to be looking at the different options.
>
> Just trying to get some ideas.
>
> Thanks,
>
> Uli.
>
>
Hi,
Yes KMS, it works, little to no speed difference, with 6.5.x you only get a
maximum of 2 key groups though, e.g. two volume groups that you can use,
with 7.0 there are more.
I believe(?) the first version that supported it was 6.5.2, but it has been
awhile.
For the OS, good question, also note, I've seen issues if your tape drive
isn't a certain firmware rev in relation to the HBA firmware, the backups
break and the fiber hba/link resets it self, make sure to do a lot of
testing first.
Justin.
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
