On Thu, Feb 24, 2011 at 9:40 AM, Bahadir Kiziltan <bahadir.kiziltan AT gmail DOT com> wrote:

I have a customer using FT Media Server over 2Gbit HBA and we can see 125MB/sec per target port.
Check if SAN Client is able to read the data from fs.

On Wed, Feb 23, 2011 at 5:38 PM, Heathe Yeakley <hkyeakley AT gmail DOT com> wrote:

I picked up some Enterprise Client licenses to speed up the backups on
some of my larger database servers. I've gone through the Fiber
Transport guide and setup everything as the guide suggests. When I
fire off my first backup, I'm only getting like 20 MB/s - 30 MB/s.
Those aren't quite the numbers I was expecting. I've gone back through
the guides and checked to see if there's some glaring mistake I've
made and I can't find one.

My question is this: For those of you that use FT, do I need to go
into the OS and change anything on the HBA? Is there perhaps a setting
in the OS or maybe on the firmware of the HBA itself that might be
throttling my SAN bandwidth?

Thanks.

- Heathe Kyle Yeakley
_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu