[Veritas-bu] Can't get nbu to use drives, and cant 'up' the drives.
2010-07-15 11:55:03
tsimerson wrote:
> I think we're going to need some more information about your environment to
> help:
>
> 1. What operating system and version is your master/media server?
> 2. How are the tape drives attached (SCSI, fibre channel, etc.)?
>
> The 800 code is a fairly generic message stating the NBU cannot talk to the
> drives.
We are using solaris and we are on netbackup 6.0.
Our tapes are SCSI attached.
I can "see" the drives in the device monitor, but they stay down, will not come
up. Under the 'control' tab, they are DOWN-TLD every job that gets ran fails.
thanks.
+----------------------------------------------------------------------
|This was sent by devon_dobek AT mentor DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Veritas-bu] Can't get nbu to use drives, and cant 'up' the drives., ddobek
- [Veritas-bu] Can't get nbu to use drives, and cant 'up' the drives., tsimerson
- [Veritas-bu] Can't get nbu to use drives, and cant 'up' the drives.,
ddobek <=
- [Veritas-bu] Can't get nbu to use drives, and cant 'up' the drives., ddobek
- Re: [Veritas-bu] Can't get nbu to use drives, and cant 'up' the drives., Jim Horalek
- [Veritas-bu] Can't get nbu to use drives, and cant 'up' the drives., ddobek
|
|
|