Re: [Veritas-bu] BPCD service gets stopped automatically.

You should send your replies to the list rather than just to me. That way if someone else can help they will or if I say something stupid they’ll correct it. :-)

That looks right to me but I would have expected the installer to update it automatically for you. Did you install the client by pushing from the master or by some other means? Typically the installer would update inetd or xinetd with necessary entries and also update your /etc/services. The line below is assuming you have “bpcd” port defined in /etc/services like:

bpcd 13782/tcp bpcd

There are other ports that the installer might also configure in inetd.conf and/or /etc/services as well.

From: pranav batra [mailto:pranav_venture AT hotmail DOT com]
Sent: Monday, May 10, 2010 1:40 PM
To: Lightner, Jeff
Subject: FW: [Veritas-bu] BPCD service gets stopped automatically.

Hello,

I used undermentioned syntax now in inetd.conf

Is it right?

bpcd stream tcp nowait root /usr/openv/netbackup/bin/bpcd bpcd

Thanks and Regards
Pranav Batra

From: pranav_venture AT hotmail DOT com
To: jlightner AT water DOT com
Subject: RE: [Veritas-bu] BPCD service gets stopped automatically.
Date: Mon, 10 May 2010 23:07:04 +0530

thor 2 is a client.And i haven't done any entry of bpcd in inetd.conf.

Can you help me how to do entry in inetd.

Thanks and Regards
Pranav Batra

Subject: RE: [Veritas-bu] BPCD service gets stopped automatically.
Date: Mon, 10 May 2010 13:28:55 -0400
From: jlightner AT water DOT com
To: pranav_venture AT hotmail DOT com; veritas-bu AT mailman.eng.auburn DOT edu

If it is a “client” why aren’t you running it in inetd or xinetd?

Maybe you are and don’t understand the purpose of inetd/xinetd is to “listen” for the port and start the process only when there is a request to actually do something from the master? Maybe inetd/xinetd is interfering with command line run.

Did you mean media server instead of client?

What happens if you try “telnet thor2 13782” from your NetBackup master server?

From: veritas-bu-bounces AT mailman.eng.auburn DOT edu [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of pranav batra
Sent: Monday, May 10, 2010 1:22 PM
To: Veritas
Subject: [Veritas-bu] BPCD service gets stopped automatically.

Hello Geeks,

I am facing issue with BPCD on one of my clients.

Its BPCD services gets stopped automatically and i have to run it manually again and again

Client :-

SunOS thor2 5.8 Generic_108528-03 sun4u sparc SUNW,Ultra-1

Now i started again and backups running fine.

thor2# ./bpcd -port 13782

bind(13782) failed: 125

===========================================

thor2# ps -ef |grep bpcd

root 13819 1 0 12:20:04 ? 0:00 ./bpcd -port 13782

root 13824 13811 0 12:20:49 pts/1 0:00 grep bpcd

============================================

Please let me know if anything can be done.

Thanks and Regards
Pranav Batra

The battle for the FIH Hockey World Cup Drag n' drop

Proud partner. Susan G. Komen for the Cure.

Please consider our environment before printing this e-mail or attachments.

----------------------------------
CONFIDENTIALITY NOTICE: This e-mail may contain privileged or confidential information and is for the sole use of the intended recipient(s). If you are not the intended recipient, any disclosure, copying, distribution, or use of the contents of this information is prohibited and may be unlawful. If you have received this electronic transmission in error, please reply immediately to the sender that you have received the message in error, and delete it. Thank you.
----------------------------------

The latest auto launches and test drives Drag n’ drop

Catch the changing security environment Get it now.

_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu