Hi Forum,

My backup environment has 6.5.3 Master ---> controls robot.
2 Media Server 6.5.3 ----> controls drives.

Tape Library is SL500 with 16 Drives, 8 on each media server.

Now the problem is 1 of the media server is showing all 8 drives on OS level 
when check through sgscan etc. But when i do device configuratin from NB GUI it 
shows me the drives as standalone. It is not coming under robot control.

Whereas the other medias server is working fine.

When i manually add the drives through tpconfig it is accepting it and coming 
under robot control.

Can you suggest/advice me as to where the problem is and what i can do to 
prevent this.

Thanks in Advance.

+----------------------------------------------------------------------
|This was sent by qureshiumar AT rediffmail DOT com via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------


_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu