[Veritas-bu] Media ID / Barcode rules
2010-01-06 07:49:05
Our environment, NBU 6.5.4 running on HP-UX 11-31 with a Data Domain VTL and newly attached MSL6060 tape library that replaced a SureStore 20/700 library. I don’t think we had any barcode rules set up for anything but cleaning cartridges when we were using the 20/700 library. The physical barcodes on the tapes are for example 000001L1 and the last 2 characters were dropped leaving 000001 as the Media ID and Barcode. Now that the MSL6060 library is connected when I do an inventory it gives me 0001L1 for a Media ID and 000001L1 for a Barcode. I’m going through the manual and getting confused on how to accomplish dropping the last 2 characters (L1) and using only the first 6 (000001) for both Media ID and Barcode. Can anyone let me know or at least point me in the right direction to accomplish this?
Thanks in advance…
Wayne BeDour
Unix System Administrator
PH: 248-447-1739
Internet: wbedour AT lear DOT com
**********************
** LEGAL DISCLAIMER **
**********************
This E-mail message and any attachments may contain
legally privileged, confidential or proprietary
information. If you are not the intended recipient(s),
or the employee or agent responsible for delivery of
this message to the intended recipient(s), you are
hereby notified that any dissemination, distribution
or copying of this E-mail message is strictly
prohibited. If you have received this message in
error, please immediately notify the sender and
delete this E-mail message from your computer. |
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Veritas-bu] Media ID / Barcode rules,
BeDour, Wayne <=
|
|
|