You might also like to look at the 6.5.3 doc updates. There are some
additional references in there under the 6.5.2 section.
ftp://exftpp.symantec.com/pub/support/products/NetBackup_Enterprise_Server/305408.pdf
From:
veritas-bu-bounces AT mailman.eng.auburn DOT edu [mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu]
On Behalf Of John Nardello
Sent: Tuesday, June 23, 2009 1:55 PM
To: Jim Caldwell; veritas-bu AT mailman.eng.auburn DOT edu
Subject: Re: [Veritas-bu] Trying to use NBU SAN Client
Look for the Shared Storage Guide, should be technote 318351.
Section 5
talks all about setting up the SAN client stuff.
From:
veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Jim
Caldwell
Sent: Tuesday, June 23, 2009 1:27 PM
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] Trying to use NBU SAN Client
Is there a setup
doc. for SAN Client for NBU. I have the troubleshooting Guide and best
practices for Deployment, But at a loss to get it to work.
We have a Solaris 10
Master/Media server 6130 SAN Device, with Qlogic 2385 cards on all servers,
with several Windows, Solaris servers attached to the SAN device. Enterprise
Lic. Key is installed. Thanks.
James M. Caldwell
NCCCS Unix Support
Operation & Systems Analyst
caldwellj AT nccommunitycolleges DOT edu
919-807-7234 (Office)
___________________________________________________
E-mail correspondence to and from this address may be subject
to the North Carolina Public Records Law and shall be disclosed
to third parties when required by the statutes. (NCGS.Ch.132)
___________________________________________________