|
Thanks
Does the problem occur "straight away" or after a period of
time? Say 2 hours for example?
On the Windows box, enable logging for BPCD and BPBKAR in
NetBackup \ Logs folder.
Make sure Network settings are correct (especially speed /
duplex)
make sure rules setup as 10054 I believe is socket related
and hence the reason why the backup is stopping.
Make sure DNS and Name resolution is working ok. I think
teh command BPCLTCMD -pn or -hn could help with this.
In my case, after 2 hours the backup died, and it was due
to the configuration of the Firewall itself resetting connected after 2 hours
and 4 mins exactly :-)
Simon
Hi,
Can somebody please help, I’m running Netbackup 5.1 MP4 on a
Solaris 10 platform, the other day I loaded the latest Solaris 10 patches and
all of a sudden I started experiencing error message “FTL - tar file write error
(10054)” on the Windows 2003 servers behind the firewall.
Thanks
This electronic communication and the attached file(s) are subject to a
disclaimer which can be viewed at
http://www.multichoice.co.za/multichoice/view/multichoice/en/page21855.
If you are unable to view the
disclaimer, please email disclaimer AT multichoice.co DOT za for
a copy.
This email (including any attachments) may contain confidential
and/or privileged information or information otherwise protected
from disclosure. If you are not the intended recipient, please
notify the sender immediately, do not copy this message or any
attachments and do not use it for any purpose or disclose its
content to any person, but delete this message and any attachments
from your system. Astrium disclaims any and all liability if this
email transmission was virus corrupted, altered or falsified.
-o-
Astrium Limited, Registered in England and Wales No. 2449259
Registered Office:
Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England |
|
