[Veritas-bu] Robotic Path error

Subject:

From:

"McDonald II, James F." <JAMES.F.MCDONALD.II AT saic DOT com>

To:

<veritas-bu AT mailman.eng.auburn DOT edu>

Date:

Mon, 30 Mar 2009 09:25:09 -0400

All,

I started getting error code 201, “unable to open robotic path.” I am unable to inventory the robot or run diagnostics, and I haven’t been able to execute my policies. As far as I can tell, everything is configured correctly within NBU. I replaced the SCSI cable and I have run the “configure robot” portion of the wizard, as a safe measure. I used the driver included with the NBU software to connect my Quantum Superloader3 and it was working fine. This error started popping up out of the blue a few days ago and I have been unable to resolve it.

Also, I downloaded and installed the Linux client. Do you need xinetd installed/running for the Linux NBU client and NBU master to see each other?

_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

<Prev in Thread]

Current Thread

[Next in Thread>

Previous by Date:

[Veritas-bu] Moving the NetBackup Master Server from host A to B., Justin Piszcz

Next by Date:

Re: [Veritas-bu] Robotic Path error, Justin Piszcz

Previous by Thread:

[Veritas-bu] Moving the NetBackup Master Server from host A to B., Justin Piszcz

Next by Thread:

Re: [Veritas-bu] Robotic Path error, Justin Piszcz

Indexes:

[Date] [Thread] [Top] [All Lists]