Re: [Veritas-bu] Using Fiber Channel Drives in 6.5
2009-03-05 08:59:50
On Wed, 4 Mar 2009, jthompson wrote:
>
> Thanks for replies.
>
> Tim-
>
> I've ran the make_scsi_dev and it did populate the /dev/sg directory with 2
> robotic control files.
>
> Matt-
>
> scan returns the following:
>
> #./scan
> ************************************************************
> *********************** SDT_TAPE ************************
> *********************** SDT_CHANGER ************************
> *********************** SDT_OPTICAL ************************
> ************************************************************
>
> It appears that the drivers aren't installed correctly as it only returns
> this and not the info for the library or the drives.
>
> +----------------------------------------------------------------------
> |This was sent by jthompson AT edmunds DOT com via Backup Central.
> |Forward SPAM to abuse AT backupcentral DOT com.
> +----------------------------------------------------------------------
>
>
> _______________________________________________
> Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
You need to make sure your zoning is setup correctly on the fiber channel
switch/fabric, otherwise it will not see the drives/etc.
Justin.
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|