Re: [Veritas-bu] bpstart timeout not honoured
2008-08-28 08:31:30
Dave,
Looks like you have a typo below, but
that's not important. What is is that regardless of what the bpstart
timeout is set to on the client, it has to be set to the same or greater
on the master server...if master server timeout is less than client, master
will get honored before the client. You also need to have it set
the same or greater on the media server.
Ken Zufall
Technical Analyst
D660C
The Goodyear Tire & Rubber Company
Dave Markham <dave.markham AT fjserv DOT net>
Sent by: veritas-bu-bounces AT mailman.eng.auburn DOT edu
08/28/2008 07:00 AM
Please respond to
dave.markham AT fjserv DOT net |
|
To
| "veritas-bu AT mailman.eng.auburn DOT edu"
<veritas-bu AT mailman.eng.auburn DOT edu>
|
cc
|
|
Subject
| [Veritas-bu] bpstart timeout not honoured |
|
Guys i have a bpstart script on a client which initiates
an RMAN backup
(i just emailed about it 2 mins ago for a different reason).
As the RMAN backup takes some time i have put the following into bp.conf
on the client that initiates the bpstart
CLIENT_READ_TIMEOUT = 24000
BPSTART_TIMEOUT = 2400
After some investigation it seems a job has exited with status 74 after
11000 seconds saying bpstart failed to complete. It then causes the
script to run again as i have retries per 12 hours set to 2.
Anyone any idea why the time out is not being honoured for the client?
Cheers
Dave
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|