|
Re: [Veritas-bu] robot not enabled.
2008-07-14 15:50:17
Does the OS see the robot? Check that
using sgscan -- if the OS doesn’t see the changer then that’s your
problem.
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Taylor, David (MARSYS)
Sent: Monday, July 14, 2008 12:19
To:
veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] robot not
enabled.
good
morning.
i am setting up a test disaster recovery server running netbackup 6 mp5
on a v210 with solaris 10 with a exabyte magnum 1x7 autoloader.
running the storage device wizard fails thus leaving the robot disabled
"not enabled", the lto 3 tape drive is picked up without problems.
i have tried to configure the robot manually using tpconfig but get the
some results.
any ideas?
thanks, dave..
|
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|
