Hi folks,

I have a Sun SL48 with two HP LTO4 drives, why each LTO4 drive come with 2 FC 
ports ?

The robotic can pass thru either Drive1 or Drive2 as multiLUN. In my case, the 
robotic arm pass thru' using drive1 as following.

#sgscan
/dev/sg/c0tw500110a0008c35cbl0: Tape (/dev/rmt/0): "HP      Ultrium 4-SCSI  
H29W" : NOT-IN-ST-CONFIG-FILE
/dev/sg/c0tw500110a0008c35cbl1: Changer: "HP      MSL G3 Series   E.70"
/dev/sg/c0tw500110a0008c35d1l0: Tape (/dev/rmt/1): "HP      Ultrium 4-SCSI  
H29W" : NOT-IN-ST-CONFIG-FILE

Rdgs
ssloh

_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu