One thing that I noticed historically speaking
is that the cleaning tape counts get reset to 0, so make note of those if you go
this route…
Harry S.
Atlanta
From: Scott
Jacobson [mailto:SJACOBSO AT novell DOT com]
Sent: Wednesday, April 16, 2008
12:56 PM
To: Steve Hudson; Jack L Forester;
nbu; Schaefer, Harry
Subject: RE: [Veritas-bu] ACSLS
7.1 to 7.2
What about
retaining information from your earlier 7.x environment.
Maybe I'm under
the wrong assumption that a fair amount of historical information would be lost
if you didn't migrate?
Scott
>>> "Forester, Jack L" <jack.l.forester AT lmco DOT com>
4/16/2008 10:11 AM >>>
We did the same thing. We moved it
to a new server. Installed ACSLS and audited the library. No
issues.
Jack L. Forester, Jr.
UNIX Systems Administrator, Stf
Lockheed Martin Information Technology
(304) 625-3946
From:
veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Schaefer, Harry
Sent: Tuesday, April 15, 2008
10:49 AM
To: Hudson, Steve; Scott Jacobson;
nbu
Subject: Re: [Veritas-bu] ACSLS 7.1
to 7.2
We recently upgraded to ACSLS 7.2. It was
very simple with no DB issues. Of course we did not migrate the database. We
did a fresh install and a library audit populated the new database.
Harry S.
Atlanta
From:
veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Hudson, Steve
Sent: Monday, April 14, 2008 1:21
PM
To: Scott Jacobson; nbu
Subject: Re: [Veritas-bu] ACSLS
7.1 to 7.2
I will be doing this soon as well so I am
also interested in real world experiences.
From:
veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Scott Jacobson
Sent: Monday, April 14, 2008 11:41
AM
To: nbu
Subject: [Veritas-bu] ACSLS 7.1 to
7.2
Has anyone
upgraded their ACSLS 7.1 to 7.2?
Just curious if
there were any issues with database migration from Informix to Postgres?
I didn't see
anything on the topic at Backup Central.
The instructions
from the StorageTek 7.2 ICAG look straight forward, but looks can be deceiving.
Any
experiences, suggestions or guidelines would be appreciated.
The
information contained in this email message and its attachments is intended
only for the private and confidential use of the recipient(s) named above,
unless the sender expressly agrees otherwise. Transmission of email over the
Internet is not a secure communications medium. If you are requesting or have
requested the transmittal of personal data, as defined in applicable privacy
laws by means of email or in an attachment to email you must select a more
secure alternate means of transmittal that supports your obligations to protect
such personal data. If the reader of this message is not the intended recipient
and/or you have received this email in error, you must take no action based on
the information in this email and you are hereby notified that any
dissemination, misuse, copying, or disclosure of this communication is strictly
prohibited. If you have received this communication in error, please notify us
immediately by email and delete the original message.