Travis,

Very good point!  I was neglecting the network routing aspect.  So if I
create multiple SERVER=   entries for my Media Servers with the
appropriate hostnames (resolving back to the correct IP addresses) and
put these lines in the relevant bp.conf files on the clients then the
routing should take care of the rest?

Regards,

Paul Esson
-----Original Message-----
From: Travis Kelley [mailto:rhatguy AT gmail DOT com] 
Sent: 04 March 2008 16:49
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: Re: [Veritas-bu] Media Server with multiple NICS]

You should be able to achieve this without anu configuration changes
to NB itself.  We use multiple nics and you just have to make sure the
routing is correct.  When bpcd on the media server connects to the
client the client will then connect back to that same ip (assuming
that ip is allowed in the bp.conf on the client). So make sure you
route traffic out the proper interface and the client will send data
back through that interface.   You do not need multiple storage units.
 The storage unit is not tied to the interface the data came in on.
Hope this helps.

Travis
- Original message -
Yes, appears so, I'd like to know what you find. Regards Carl ...



On 3/4/08, Travis Kelley <travis.kelley AT etrade DOT com> wrote:
>

-- 
Sent from Gmail for mobile | mobile.google.com


_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu