On Tue, 26 Feb 2008, Dominik Pietrzykowski wrote:

>
>
>> Quite nice-- have you experienced any issues with that setup so far?
>
> A few, more to do with adding new media servers and seeing limits on the new
> ACSLS client file. There's a limit as to how many you can add to a line.
>
> I have had to restart drives individually and we had a few that were DOA
> when we had the library setup.
>
> One tip is that make sure tapes are not in use when you try to eject them,
> netbackup does not like it. One of the guys did it here and it took me a
> while to fix it.
>
>> Also, how did you add the drives via ACSLS?
>
> run:
>
> config drive 0,3,1 (lsm to search for new drives)
>
> Note: Do this from the command line as acsss user and not in acsls
> (cmd_proc)
>
> I'm guessing you know how to list drives in acsls to see that new ones have
> been added ?
>
>> With the standard config acs > 0 command to pickup & re-inventory all
>> hardware or?
>
> Haven't used that one.
>
> Cheers,
>
> Dominik

One last question (for now): when you add the robot (ACSLS) and tape drives
to the new media servers, how do you go about doing it (your method)?

Could you show your tpconfig -d on the media server using:

1. 9840 drives
2. T10K drives

And also the commands you used to configure them, and also:
/usr/openv/volmgr/bin/vmglob -listall -b on the master?

Thanks!

Justin.

_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu