Absolutely;
I will follow up with my results. Don’t go away.
From: WEAVER, Simon
(external) [mailto:simon.weaver AT astrium.eads DOT net]
Sent: Thursday,
February 14, 2008 8:29 AM
To: Randy Samora; Rosenkoetter,
Gabriel
Cc: veritas-bu AT mailman.eng.auburn DOT edu
Subject: RE:
[Veritas-bu] Restoring Shadow Copy Component/System
State
Got to admit, I
restored a DC Win2k3 in AD Restore Mode, and I did not follow the
document.
Can you let us know
how this goes?
From:
veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of Randy
Samora
Sent: Thursday, February 14, 2008 2:23 PM
To:
Rosenkoetter, Gabriel
Cc:
veritas-bu AT mailman.eng.auburn DOT edu
Subject: Re: [Veritas-bu] Restoring
Shadow Copy Component/System State
If
this works, you have a case of beer headed your way. I’ve been stressing
over this for years.
I’ll
let you know how it goes.
Thanks,
Randy
From: Rosenkoetter,
Gabriel [mailto:Gabriel.Rosenkoetter AT radian DOT biz]
Sent: Thursday,
February 14, 2008 7:27 AM
To: Randy Samora;
veritas-bu AT mailman.eng.auburn DOT edu
Subject: RE: [Veritas-bu] Restoring
Shadow Copy Component/System State
Assuming
that you've got either the Shadow Copy Components:\ target (or, preferably,
ALL_LOCAL_DRIVES) in the policy's include list, then there are a few extra steps
you should take when doing a full system restore for Win2k3 (while not using
BMR, which "should" take care of all of this for you).
This tech
note does a pretty good job of describing it:
http://support.veritas.com/docs/295342
The main nut
of it is that you need to do an OS install, a NetBackup client install, go run
[...]\VERITAS\bin\w2koption -restore -same_hardware 1 once, perform the restore,
then run the same command again (because you just laid down a restored registry
in which that may not have been set, is my understanding), then reboot. And
cross your fingers.
(That said,
it still tends to be hairy, especially for domain controllers--or whatever we
call those in an AD world--and a co-worker has a case open in which portions of
SCC fail to restore properly on a DC under 6.5...)
--
gabriel
rosenkoetter
Radian Group Inc,
Unix/Linux/VMware Sysadmin / Backup & Recovery
gabriel.rosenkoetter AT radian DOT biz,
215 231 1556
________________________________
From: Randy
Samora [mailto:Randy.Samora AT stewart DOT com]
Sent: Wednesday,
February 13, 2008 6:21 PM
To:
veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu]
Restoring Shadow Copy Component/System State
Part of my
requirements are test restores of critical boxes in a lab environment. The
lab is isolated and when I restore a client, there’s not really much we can test
because the client looks for the production network. Today I had to
restore a Windows 2003 Server in the production environment and most of the
registry wasn’t restored; services and other objects were missing. With
the test restores, I always had the option of doing an ntbackup of the System
State and then I would run a full backup of the client. I’d take my tape
to the lab, run a full restore, but before I rebooted the restored client, I
restored the ntbackup of the System State (Shadow Copy Component.) That
seemed to work just fine. But today when the server blew up, there was no
opportunity to do an ntbackup of the SS first. I asked Symantec last year
if the ntbackup was still needed and they said no, a full backup and restore
should recover the client. I just never had the chance to test that
theory.
Am I missing
a step? I installed the OS from a basic CD install, loaded the NBU client,
and then did a full restore. But it’s as if the system state was never
restored so I’m wondering if I’m even backing it up. How can I tell?
Do I need VSS or VSP activated in order to get a good copy of the system
state? We turned VSP off over a year ago because we were having problems
with the orphaned cache files. I’ve never gone back and changed the
setting on most of the clients and my plans were to start using VSS but haven’t
gotten to that task either. Is there a trick or an added step to getting a
good backup of the system state on a Windows 2003 Server server or is there a
trick to restoring it?
Thanks,
Randy
This email (including any
attachments) may contain confidential and/or privileged information or
information otherwise protected from disclosure. If you are not the
intended recipient, please notify the sender immediately, do not copy
this message or any attachments and do not use it for any purpose or
disclose its content to any person, but delete this message and any
attachments from your system. Astrium disclaims any and all liability
if this email transmission was virus corrupted, altered
or falsified. --------------------------------------------------------------------- Astrium
Limited, Registered in England and Wales No. 2449259 REGISTERED
OFFICE:- Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS,
England |
_______________________________________________