Veritas-bu

Re: [Veritas-bu] disable tld

2007-11-06 13:05:36
Subject: Re: [Veritas-bu] disable tld
From: Joe Royer <jroyer AT digitalmotorworks DOT com>
To: "Costa, Christopher" <Christopher.Costa AT netapp DOT com>
Date: Tue, 6 Nov 2007 11:40:20 -0600 (CST)
Actually I tried that too, but again, maybe I didn't wait long enough for 
it to timeout.


On Tue, 6 Nov 2007, Costa, Christopher wrote:

> You can do that or use the robtest utility. This usually takes the
> control of the robot away from NetBackup. The drives should go into AVR
> mode.
>
> Chris
>
> -----Original Message-----
> From: Rosenkoetter, Gabriel [mailto:Gabriel.Rosenkoetter AT radian DOT biz]
> Sent: Tuesday, November 06, 2007 10:56 AM
> To: Joe Royer; veritas-bu AT mailman.eng.auburn DOT edu
> Subject: Re: [Veritas-bu] disable tld
>
> Do something that always takes the robot offline, like opening the front
> door.
>
>
> --
> gabriel rosenkoetter
> Radian Group Inc, Unix/Linux/VMware Sysadmin / Backup & Recovery
> gabriel.rosenkoetter AT radian DOT biz, 215 231 1556
>
>
> -----Original Message-----
> From: Joe Royer [mailto:jroyer AT digitalmotorworks DOT com]
> Sent: Monday, November 05, 2007 7:53 PM
> To: veritas-bu AT mailman.eng.auburn DOT edu
> Subject: [Veritas-bu] disable tld
>
> Is there a way to manually down tld0, thus forcing the library drives to
> AVR?
> I tried upoprbyname and that still put the drives in TLD.
>
> Today is not a good day.  The robot is dead, and the vendor is having
> "logistics issues" which means I have been waiting on a replacement part
> for 9
> hours now.  Occasionally NetBackup downs tld0 on its own, the drives go
> to AVR,
> and I can manually switch tapes to keep things flowing.  Just as
> magically, the
> robot will start responding again, NBU up's tld0 and the drives that
> aren't
> currently busy go down.
>
> If there is some way to force the drives to AVR, I can finish flushing
> my DSSUs
> and be relatively ok until the parts arrive (I hope).  I have tried
> unplugging
> the fibre connection to the robot (not the drives) and that didn't work,
> but I
> only waited about 10 minutes, so maybe I didn't satisfy some timeout.
>
> Help
>
> PS:  Said vendor is being flogged, I'm angling for Platinum support at
> Silver
> prices since that's the level of service I have recieved today.
>
>
> This message and any attachments are intended only for the use of the
> addressee and may contain information that is privileged and
> confidential. If the reader of the message is not the intended recipient
> or an authorized representative of the intended recipient, you are
> hereby notified that any dissemination of this communication is strictly
> prohibited. If you have received this communication in error, please
> notify us immediately by e-mail and delete the message and any
> attachments from your system.
>
>
>
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>

-- 
Joe Royer / Sr. SysAdmin / Digital Motorworks / 512-692-1028


This message and any attachments are intended only for the use of the addressee 
and may contain information that is privileged and confidential. If the reader 
of the message is not the intended recipient or an authorized representative of 
the intended recipient, you are hereby notified that any dissemination of this 
communication is strictly prohibited. If you have received this communication 
in error, please notify us immediately by e-mail and delete the message and any 
attachments from your system.
_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

<Prev in Thread] Current Thread [Next in Thread>