Just an update on this one.  My client had the firewall set up wrong, they
had inside to outside connections rather than inside to inside connections
set up...once that was fixed, we were great!


 
 
Reneé Carlisle 
ServerWare Corporation
 



-----Original Message-----
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of rcarlisle
Sent: Tuesday, September 25, 2007 9:07 PM
To: 'David Rock'; veritas-bu AT mailman.eng.auburn DOT edu
Subject: Re: [Veritas-bu] Firewall configuration setup

No connect back for each client under the firewall configuration tab?  With
6.0, you were only supposed to have to use VNETD... Is there any way to
force the 5.0 client to only use vnetd and not open up the bpcd port? 


 
 
Reneé Carlisle 
ServerWare Corporation



-----Original Message-----
From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu] On Behalf Of David 
Rock
Sent: Tuesday, September 25, 2007 8:28 PM
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: Re: [Veritas-bu] Firewall configuration setup

* rcarlisle <rcarlisle AT serverwarecorp DOT com> [2007-09-25 19:39]:
>  
> Can someone please help me with the following configuration:
> 
> Client - NBU 5.1
> Master/Media - NBU 6.5
> 
> Port 13724 VNETD is opened both ways. What needs to be set up in NBU on
> Master server and Client...global attributes, firewall settings...reserved
> ports....I still can't get the master server to see the client in hosts
> attributes.

There's pretty extensive documentation in the manuals for this (more
than most people should _ever_ read), but the minimum you need is the
following:

Server -> Client 13782(bpcd)
Client -> Server 13724(vnetd)
Client -> Server 13720(bprd) - but only if you need client initiated
stuff.

In order for vnetd to work properly, you need to add the no connectback
option in the client properties on the master server only.  You can get
to the client settings using bpclient, too.

vnetd Server -> Client is pretty useless.

There are some other things you _could_ open up, but that should get you
where you need to be.

-- 
David Rock
david AT graniteweb DOT com
_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu



_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu



_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu