Does your library support partitioning? That may be a simple way to go and then
you can split the drives and cartridge slots and have the best of both worlds.
All you would have to do in Netbackup is add a second library.
Doug Preston
Systems Engineer
Land America Tax and Flood Services
Phone 626-339-5221 Ext 1104
Email dlpreston AT landam DOT com
------------------------------------------------------------------------------------
NOTICE: This electronic mail transmission may constitute a communication that
is legally privileged. It is not intended for transmission to, or receipt by,
any unauthorized persons. If you have received this electronic mail
transmission in error, please delete it from your system without copying it,
and notify the sender by reply e-mail, so that our address record can be
corrected.
------------------------------------------------------------------------------------
-----Original Message-----
From: Martin Ruslan [mailto:mit.martin AT gmail DOT com]
Sent: Tuesday, October 02, 2007 10:19 AM
To: Justin Piszcz
Cc: Preston, Douglas L; veritas-bu AT mailman.eng.auburn DOT edu; pkeating AT
bank-banque-canada DOT ca
Subject: Re: [Veritas-bu] LTO3 mixed LTO2 drive using LTO2 cartridges withACSLS
As promised,
here's what I've got.
There's no exactly straight solution for this problem. Because basically
Netbackup already separate the HCART2 and HCART3.
So I'm dealing with 4 points on this problem
1) cartridge type
2) density on the image
3) drive type
4) ACS side.
Every tricks on Netbackup side, always makes me have to sacrificed the other
thing.
Let say I try to use the API_BARCODE_RULES, and make all HCART2 on ACS mapped
to HCART3 on Netbackup, how bout the density on the image? because it already
on HCART2 density. You can run a command to change the image density, but it
have to be done one by one, so painfull... Or even vice versa, the LTO3 drive
had to be set as HCART2 also.. Looks like it's not the win-win solution for
this..
There's still few tricks, but looks like not recommended by Symantec also...
So... who ever needed can take the conclusions for this problem..
Thanks all..
On 9/28/07, Martin Ruslan <mit.martin AT gmail DOT com> wrote:
Finally, everybody listening.. ;)
If we change the drive to be HCART2, how bout the LTO cartridge? :(
Meanwhile, I'll try Marianne suggestion.
I'll update the result.
Thanks all..
Regards,
Martin.
On 9/27/07, Justin Piszcz < jpiszcz AT lucidpixels DOT com
<mailto:jpiszcz AT lucidpixels DOT com> > wrote:
That'll work in NetBackup but ACSLS knows better and you need
to take care
of it there as well.
On Thu, 27 Sep 2007, Preston, Douglas L wrote:
> Don't change the media to HCART3 leave it HCART2 and
configure the LTO3
> drives as LTO2
>
>
> Doug Preston
> Systems Engineer
> Land America Tax and Flood Services
> Phone 626-339-5221 Ext 1104
> Email dlpreston AT landam DOT com <mailto:dlpreston AT
landam DOT com>
>
>
>
------------------------------------------------------------------------
> ------------
> NOTICE: This electronic mail transmission may constitute a
communication
> that is legally privileged. It is not intended for
transmission to, or
> receipt by, any unauthorized persons. If you have received
this
> electronic mail transmission in error, please delete it from
your system
> without copying it, and notify the sender by reply e-mail, so
that our
> address record can be corrected.
>
------------------------------------------------------------------------
> ------------
>
>
>
>
> -----Original Message-----
> From: veritas-bu-bounces AT mailman.eng.auburn DOT edu
> [mailto: veritas-bu-bounces AT mailman.eng.auburn DOT edu
<mailto:veritas-bu-bounces AT mailman.eng.auburn DOT edu> ] On Behalf Of Martin
> Ruslan
> Sent: Thursday, September 27, 2007 3:48 AM
> To: veritas-bu AT mailman.eng.auburn DOT edu
<mailto:veritas-bu AT mailman.eng.auburn DOT edu>
> Subject: Re: [Veritas-bu] LTO3 mixed LTO2 drive using LTO2
cartridges
> withACSLS
>
> Sigh...
> As always, nobody in this forum want to help me.
> Thanks for Paul who tried to help me by replied me personally.
>
>
>
> On 9/26/07, Martin Ruslan < mit.martin AT gmail DOT com>
wrote:
>
> Dear friends,
>
> I'm using the Storagetek Library, using ACSLS, where
the drive
> is LTO2 and we adding the new LTO3 drives, but we still don't
have the
> LTO3 cartridges.
> So, we still use the LTO2 cartridge for using on this
LTO2 and 3
> drives.
> on the DR, we'll use only LTO3 drives (only for restore
> purposes)
> So this LTO2 cartridges will always be use on LTO3
drives.
>
> The problem is, when I want to use the LTO2 cartridges
on LTO3
> drives, so I have to change the density of the LTO2 tapes
right?
> So I run this: vmchange -new_mt hcart3 -m dc0273.
> Ok, the backup running well, the LTO2 cartridge can be
used on
> LTO3 drives.
>
> But, when we want to add, or eject the cartridges from
the
> Library, and we run the inventory robot on NBU, disaster
happen.
> I got this error when doing the inventory on NBU side:
> Generating list of recommended changes ...Update
failed: media
> ID DC0273 in database has media type 'HCART3', whichdiffers
from media
> ID DC0273 in the robot which is (according to themedia type
returned
> from the robot, adjusted by media type mappings)projected to
have a
> media type of 'HCART2'.
>
> I think, this error comes because the ACSLS comparing
his
> catalog database with the NBU catalog.
> Because, when I'm using other environment (without
using the
> ACSLS), there's no problem at all.
> Is there any suggestion for this? Waiting for your help
guys...
>
> Regards,
> Martin.
>
>
>
>
> _______________________________________________
> Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT
edu <mailto:Veritas-bu AT mailman.eng.auburn DOT edu>
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
<http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu>
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|