I did the obvious and restarted netbackup.
But if anyone can supply a command line, I will try that next time.
>>> "Bob Stump" <StumpB at michigan.gov> 4/18/2007 11:03 AM >>>
I have a server that shows that it's tape drives are UP
I have a server that contains the emm db that shows that the drives are
DOWN
How do I update the emmdb to know/reflect that the tape drives are up
on that server?
on the media server
# sudo tpconfig -l
Device Robot Drive Robot Drive
Device Second
Type Num Index Type DrNum Status Comment Name
Path Device Path
robot 0 - ACS - - - -
siloserver
drive - 4 hcart2 - UP - STK9940B_0011_8
/dev/rmt/3cbn ACS=0, LSM=0, PANEL=1, DRIVE=1
drive - 5 hcart2 - UP - STK9940B_0213_11
/dev/rmt/4cbn ACS=0, LSM=2, PANEL=1, DRIVE=3
drive - 10 hcart2 - UP - STK9940B_0112_9
/dev/rmt/11cbn ACS=0, LSM=1, PANEL=1, DRIVE=2
drive - 11 hcart2 - UP - STK9940B_0312_10
/dev/rmt/8cbn ACS=0, LSM=3, PANEL=1, DRIVE=2
on the emm server
sudo vmoprcmd | grep -i mediaserver
mediaserver 600000 ACTIVE
mediaserver /dev/rmt/3cbn
DOWN-ACS
mediaserver /dev/rmt/11cbn
DOWN-ACS
mediaserver /dev/rmt/4cbn
DOWN-ACS
mediaserver /dev/rmt/8cbn
DOWN-ACS
on the siloserver
ALL drives are online and available
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://mailman.eng.auburn.edu/pipermail/veritas-bu/attachments/20070419/c2adeffa/attachment-0001.htm
|