On Wed, 22 Nov 2006, Scott Jacobson wrote:

> Perhaps this question was already answered, what about the StorageTek 
> "LibAttach"? This is required for a windows Master and I'd assume an 
> equivalent binary for Linux side is also required.
> -sj
> 
> Scott Jacobson
> NetBackup Systems Administration
> Data Retention and Storage Management
> I. S. & T. Provo Operations
> sjacobso at novell.com
> Desk Direct: 801-861-7668
> Toll Free: 800-453-1267 Ext. 1-7668
> Cell: 801-560-6891
> 
> 
> 
> >>> Yoseph Leleputra <leleputra at yahoo.com> 11/22/2006 1:05 AM >>>
> 
> i think what you had done is testing from ACSLS side 
> Maybe you need to check the connection from ACSLS Host to Master server ( 
> ping test ,, telnet etc ) 
> i have an experience connecting NBU with ACSLS but with L5000 not with SL85000
> Maybe you have a firewall between ACSLS Hosts and Master Server ???? if you 
> have maybe you must open the firewall first. 
> Maybe you need to recheck again your configuration and try to restart NBU 
> services again 
> 
> 
> 
>  
> ----- Original Message ----
> From: Justin Piszcz <jpiszcz at lucidpixels.com>
> To: "WEAVER, Simon" <simon.weaver at astrium.eads.net>
> Cc: veritas-bu at mailman.eng.auburn.edu
> Sent: Tuesday, November 21, 2006 7:50:30 PM
> Subject: Re: [Veritas-bu] ACS Error: robot inventory failed: Unable toinit 
> ialize robot (204)
> 
> 
> robtest works fine, I can display what is in all of the slots etc, I have 
> setup regular robots as well -- but this is ACSLS..
> 
> I am waiting for someone to check the library front panel to make sure the 
> robot is 'ready'
> 
> 
> On Tue, 21 Nov 2006, WEAVER, Simon wrote:
> 
> > 
> > Justin
> > I do not have that robot, but have you recycles the services again?
> > Also, may be a bit drastic, but what if you remove the robot and drives and
> > re-run device config wizard?
> > 
> > Any specific errors or messages on the Robotic LCD Display? What about
> > powering cycling the robot?
> > 
> > Or ROBTEST for example? Just a thought....
> > 
> > Sounds like a misconfigured device or scsi error possibly....
> > 
> > Regards
> > 
> > Simon Weaver
> > 3rd Line Technical Support
> > Windows Domain Administrator 
> > 
> > EADS Astrium Limited, B23AA IM (DCS)
> > Anchorage Road, Portsmouth, PO3 5PU
> > 
> > Email: Simon.Weaver at Astrium-eads.net
> > 
> > 
> > 
> > -----Original Message-----
> > From: Justin Piszcz [mailto:jpiszcz at lucidpixels.com] 
> > Sent: 21 November 2006 12:05
> > To: veritas-bu at mailman.eng.auburn.edu
> > Subject: [Veritas-bu] ACS Error: robot inventory failed: Unable toinitialize
> > robot (204)
> > 
> > 
> > --------------------------------------------------------------------
> > 11/21/2006 03:20:15
> > Robot: ACS(0) on backup.domain.com
> > Operation: Inventory
> > --------------------------------------------------------------------
> > robot inventory failed:  Unable to initialize robot (204)
> >  
> > --------------------------------------------------------------------
> > 
> > Anyone know why I cannot inventory the robot? Also I setup the drives per 
> > their acs,lsm,rail,drive configuration and they all appear as AVR.
> > 
> > Anyone else here setup an STK8500 library with ACSLS before?
> > 
> > Justin.
> > _______________________________________________
> > Veritas-bu maillist  -  Veritas-bu at mailman.eng.auburn.edu
> > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> > 
> > This email (including any attachments) may contain confidential and/or 
> > privileged information or information otherwise protected from disclosure. 
> > If you are not the intended recipient, please notify the sender 
> > immediately, do not copy this message or any attachments and do not use it 
> > for any purpose or disclose its content to any person, but delete this 
> > message and any attachments from your system. Astrium disclaims any and all 
> > liability if this email transmission was virus corrupted, altered or 
> > falsified.
> > ---------------------------------------------------------------------
> > Astrium Limited, Registered in England and Wales No. 2449259
> > Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, 
> > England
> > 
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu at mailman.eng.auburn.edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

Good questions, AFAIK there is not, or not that I know of, anyone here 
uses ACSLS on UNIX box that knows?