Veritas-bu

[Veritas-bu] Drive Type

2006-07-19 07:57:33
Subject: [Veritas-bu] Drive Type
From: pkeating at bank-banque-canada.ca (Paul Keating)
Date: Wed, 19 Jul 2006 07:57:33 -0400

-- 


> -----Original Message-----
> From: veritas-bu-bounces at mailman.eng.auburn.edu 
> [mailto:veritas-bu-bounces at mailman.eng.auburn.edu] On Behalf 
> Of WEAVER, Simon
> Sent: July 19, 2006 2:15 AM
> To: 'Asiye.Yigit at gantek.com'; veritas-bu at mailman.eng.auburn.edu
> Subject: Re: [Veritas-bu] Drive Type
> 
> If I understand the question correctly, if you set a drive 
> which is usually
> HCART3 and then change to HCART2, NetBackup treats the drive 
> as HCART2 - but
> I do not think it will load any HCART3 tapes in the robot.

True.

> 
> The reason why I say this, is because I had to perform a 
> restore using an
> old HCART tape - drives are set for HCART3 - if the density 
> is not changed,
> Netbackup refuses the restore.

Exactly, unless you have one drive in the robot configured same as the
tape.

> 
> If I change the density to HCART, netbackup uses the drive 
> for the restore
> from HCART tape.

Yes....keep in mind, if your aligning HCART -> LTO1 and HCART3 ->
LTO3....the LTO3 drive can read the LTO cart, but cannot write to
it......if you leave your system configured such that an LTO3 drive and
an LTO1 cart are configured as the same type, you will get errors when
Netbackup eventually tries to put that tape in that drive to write to
it.

It would be nice to be able to define the hierarchical backward
compatibility of media/drive types......

Paul
-------------- next part --------------
====================================================================================

La version fran?aise suit le texte anglais.

------------------------------------------------------------------------------------

This email may contain privileged and/or confidential information, and the Bank 
of
Canada does not waive any related rights. Any distribution, use, or copying of 
this
email or the information it contains by other than the intended recipient is
unauthorized. If you received this email in error please delete it immediately 
from
your system and notify the sender promptly by email that you have done so. 

------------------------------------------------------------------------------------

Le pr?sent courriel peut contenir de l'information privil?gi?e ou 
confidentielle.
La Banque du Canada ne renonce pas aux droits qui s'y rapportent. Toute 
diffusion,
utilisation ou copie de ce courriel ou des renseignements qu'il contient par une
personne autre que le ou les destinataires d?sign?s est interdite Si vous 
recevez
ce courriel par erreur, veuillez le supprimer imm?diatement et envoyer sans 
d?lai ?
l'exp?diteur un message ?lectronique pour l'aviser que vous avez ?limin? de 
votre
ordinateur toute copie du courriel re?u.

<Prev in Thread] Current Thread [Next in Thread>