[Veritas-bu] Ports Question
2006-06-14 10:15:31
Subject: |
[Veritas-bu] Ports Question |
From: |
dave.markham at fjserv.net (Dave Markham) |
Date: |
Wed, 14 Jun 2006 15:15:31 +0100 |
Assuming you have enabled VNETD correctly which i assume you have with
having port 137824 open, try opening 13782 also.
Cheers
Brooks, Jason wrote:
> Hopefully and easy one, but I've been unable to verify as of yet.
>
> I'm working on backing up a pair of Linux boxes through a Cisco Load
> Balancer. I've worked with our Networking group and have the bare
> essentials to get things working. We've opened up 13724 to the virtual
> IP for both the Master Server and the Media server, which has enabled a
> backup to run. Here, however, is the oddity. When the backup runs, via
> a policy that has ALL_LOCAL_DRIVES directive, I only have a child
> process for the / filesystem. I know there are more out there. I've
> tried manually specifying a file system, but I cannot connect to the
> client. Neither can I connect to the client in the Host
> Properties->Clients interface. What other ports are required to get
> this working? PBX? Others?
>
> Thanks,
> Jason
>
> ------------
> Jason Brooks
> Computer Systems Engineer
> IITS - Longwood University
> voice - (434) 395-2916
> fax - (434) 395-2035
> mailto:<brooksje at longwood.edu>
>
> _______________________________________________
> Veritas-bu maillist - Veritas-bu at mailman.eng.auburn.edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
>
|
|
|