Thanks for all your help!!!
Actually I had to restart the services on netbackup. Just inventory on the 
robot wasn't sufficient.
Thanks again,
Smitha 

-----Original Message-----
From: WEAVER, Simon [mailto:simon.weaver AT astrium.eads DOT net]
Sent: Wednesday, March 15, 2006 1:55 AM
To: Pillapalem, Smitha; veritas-bu AT mailman.eng.auburn DOT edu
Subject: RE: [Veritas-bu] Slot upgrade



To the best of my knowledge, you should not need to. Once the robot /
library is powered off and the new slots are installed, the robot will do
its own inventory.

Once that's completed, run an Inventory on the robot in Netbackup to make
sure it can see the slots.

No additional changes that I can see should be required

Simon Weaver 
Technical Support 
Windows Domain Administrator 

EADS Astrium 
Tel: 02392-708598 

Email: Simon.Weaver AT Astrium.eads DOT net 



-----Original Message-----
From: Pillapalem, Smitha [mailto:SPillapalem AT Entertainment DOT com] 
Sent: 14 March 2006 15:25
To: veritas-bu AT mailman.eng.auburn DOT edu
Subject: [Veritas-bu] Slot upgrade


Hello,
My environment consists of NB 5.1 running on HP-UX 11.11 U 9000/800 and
Storage Tek L180 tape library. Right now the library has 140 slots and
planning to upgrade it to 180 slots. 
I have scheduled a upgrade with our STK engineer tomorrow, was wondering if
I need to do anything on the netbackup side once   the library is
reconfigured with the upgraded slots?
Any help is appreciated..
Thanks in advance,
Smitha


_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu

This email is for the intended addressee only.
If you have received it in error then you must not use, retain, disseminate or 
otherwise deal with it.
Please notify the sender by return email.
The views of the author may not necessarily constitute the views of EADS 
Astrium Limited.
Nothing in this email shall bind EADS Astrium Limited in any contract or 
obligation.

EADS Astrium Limited, Registered in England and Wales No. 2449259
Registered Office: Gunnels Wood Road, Stevenage, Hertfordshire, SG1 2AS, England