Veritas-bu

[Veritas-bu] LTO 1 recovery using LTO 2 drive.

2006-03-15 08:20:53
Subject: [Veritas-bu] LTO 1 recovery using LTO 2 drive.
From: pkeating AT bank-banque-canada DOT ca (Paul Keating)
Date: Wed, 15 Mar 2006 08:20:53 -0500
It's not really that hard and fast of a rule


Netbackup doesn't know hcart from hcart2 or hcart3, but whatever type
the drive is must match the configured type of the tape.
If the tape is hcart3 and the drive is hcart2 (regardless of LTO gen)
it's gonna complain.

If you've replaced all of your LTO2 drives with LTO2 drives, then change
the type of all of your old LTO1 tapes to match the type of the new LTO2
drives.....the RFID chip in the tapes should identify the tape type to
the drive with the tape is inserted, and the drive should read/write to
the tape in the proper format based on how the tape ID's itself, not by
the configured Netbackup media format.

hcart1, 2, 3, etc, are just numeric designations....could be DLT, SDLT
or LTO of any generation.

Paul

> -----Original Message-----
> From: veritas-bu-admin AT mailman.eng.auburn DOT edu 
> [mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of 
> WEAVER, Simon
> Sent: March 15, 2006 2:00 AM
> To: 'Mickey Baker'; viv AT bassani DOT info; 
> veritas-bu AT mailman.eng.auburn DOT edu
> Subject: RE: [Veritas-bu] LTO 1 recovery using LTO 2 drive.
> 
> 
> 
> Hi
> You will need to configure one of the drives for HCART - If I 
> am reading
> your post correct, you are trying to read an LTO1 tape into 
> an LTO2 drive?
> If so this should help.... 
> 
> By putting this tape into the library / Drive, Netbackup will 
> be trying to
> look for an LTO Drive.
> 
> From the Devices / Robot field, select a drive, and you should have an
> option to select change. You want to amend the general 
> attributes for the
> drive and change it from HCART2 to HCART
> 
> I have to run this when re-reading any LTO1 tapes in my LTO3 Library.
> 
> Hope this is of some help!
> 
> Simon Weaver 
> Technical Support 
> Windows Domain Administrator 
> 
> EADS Astrium 
> Tel: 02392-708598 
> 
> Email: Simon.Weaver AT Astrium.eads DOT net 
> 
> 
> 
> -----Original Message-----
> From: Mickey Baker [mailto:mb AT unixusa DOT com] 
> Sent: 15 March 2006 01:21
> To: viv AT bassani DOT info; veritas-bu AT mailman.eng.auburn DOT edu
> Subject: RE: [Veritas-bu] LTO 1 recovery using LTO 2 drive.
> 
> 
> Hmmm...
> 
> Likely that the underlying device is issuing some sort of message that
> NetBackup doesn't like. Which FP/MP of 4.5? What is the OS of 
> the media
> server?
> 
> Check the underlying OS message file on the media server for clues.
> 
> Speculation: There may be an issue with the LTO driver you're 
> using not
> automatically reading the LTO1 tapes as it should. Whenever 
> possible, the
> latest stable driver for the tape and the OS of the media 
> server should be
> used. This sort of sounds like issues with an LTO driver or a 
> generic scsi
> tape driver.
> 
> Mickey Baker
> Fort Lauderdale, FL
> 
> -----Original Message-----
> From: veritas-bu-admin AT mailman.eng.auburn DOT edu
> [mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of
> viv AT bassani DOT info
> Sent: Tuesday, March 14, 2006 1:56 PM
> To: veritas-bu AT mailman.eng.auburn DOT edu
> Subject: [Veritas-bu] LTO 1 recovery using LTO 2 drive.
> 
> We are currently backing up a system with LTO gen 1 
> drives/media and trying
> to 
> recover using LTO gen 2 drives (LTO 1 drives are IBM and LTO 
> 2 drives are
> HP). 
> We are using NBU 4.5 and when the LTO 1 tapes are loaded into 
> the gen 2
> drive, 
> the drives are downed. Any ideas what can be causing this is 
> appreciated.
> 
> -- 
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> 
> 
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> 
> This email is for the intended addressee only.
> If you have received it in error then you must not use, 
> retain, disseminate or otherwise deal with it.
> Please notify the sender by return email.
> The views of the author may not necessarily constitute the 
> views of EADS Astrium Limited.
> Nothing in this email shall bind EADS Astrium Limited in any 
> contract or obligation.
> 
> EADS Astrium Limited, Registered in England and Wales No. 2449259
> Registered Office: Gunnels Wood Road, Stevenage, 
> Hertfordshire, SG1 2AS, England
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> 


<Prev in Thread] Current Thread [Next in Thread>