I need to create a separate storage unit for the media server
even if the robotic is controlled by the master?  I haven't done
this yet.

On Fri, 27 Jan 2006 Mark.Donaldson AT cexp DOT com wrote:

> Date: Fri, 27 Jan 2006 17:18:45 -0700
> From: Mark.Donaldson AT cexp DOT com
> To: kfhemness AT ucdavis DOT edu, Mark.Donaldson AT cexp DOT com
> Cc: veritas-bu AT mailman.eng.auburn DOT edu
> Subject: RE: [Veritas-bu] Examples of SSO vm.conf files
>
> Did you create new storage units for your media server?  Reboot?  Assign
> your policy to the new storage unit?
>
> Make sure that your both servers have the other in their bp.conf file.  Best
> guarantee is to have each labeled as a "SERVER" rather than a "MEDIASERVER".
>
>
> Master server is listed first, of course, in both servers.
>
> -M
>
> -----Original Message-----
> From: veritas-bu-admin AT mailman.eng.auburn DOT edu
> [mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu]On Behalf Of Kathryn
> Hemness
> Sent: Friday, January 27, 2006 4:42 PM
> To: Mark.Donaldson AT cexp DOT com
> Cc: veritas-bu AT mailman.eng.auburn DOT edu
> Subject: RE: [Veritas-bu] Examples of SSO vm.conf files
>
>
> Hi Mark --
>
> Here are my tpconfigs on both the Master and Media servers:
>
> Master server: /usr/openv/volmgr/bin/tpconfig -d
>
> Index DriveName              DrivePath                Type    Shared
> Status
> ***** *********              **********               ****    ******
> ******
>   0   Hagrid-1               /dev/rmt/3cbn            hcart2   Yes      UP
>         TLD(0) Definition       DRIVE=1
>   1   Hagrid-2               /dev/rmt/2cbn            hcart2   Yes      UP
>         TLD(0) Definition       DRIVE=2
>   2   Hagrid-3               /dev/rmt/1cbn            hcart2   Yes      UP
>         TLD(0) Definition       DRIVE=3
>   3   Hagrid-4               /dev/rmt/0cbn            hcart2   Yes      UP
>         TLD(0) Definition       DRIVE=4
>
> Currently defined robotics are:
>   TLD(0)     robotic path = /dev/sg/c0tw2001005013e00369l1,
>              volume database host = albus.ucdavis.edu
>
> ****************************************************************************
> ***
>
> Media Server:# /usr/openv/volmgr/bin/tpconfig -d
> Index DriveName              DrivePath                Type    Shared
> Status
> ***** *********              **********               ****    ******
> ******
>   0   Hagrid-1               /dev/st/nh1c0t0l2        hcart2   Yes      UP
>         TLD(0) Definition       DRIVE=1
>   1   Hagrid-2               /dev/st/nh1c0t0l3        hcart2   Yes      UP
>         TLD(0) Definition       DRIVE=2
>   2   Hagrid-3               /dev/st/nh1c0t0l4        hcart2   Yes      UP
>         TLD(0) Definition       DRIVE=3
>   3   Hagrid-4               /dev/st/nh1c0t0l5        hcart2   Yes      UP
>         TLD(0) Definition       DRIVE=4
>
> Currently defined robotics are:
>   TLD(0)     robot control host = albus.ucdavis.edu
>              volume database host = albus.ucdavis.edu
>
> All I/O is still going through the device paths of the Master Server.
>
>
>
> On Fri, 27 Jan 2006 Mark.Donaldson AT cexp DOT com wrote:
>
> > Date: Fri, 27 Jan 2006 15:51:24 -0700
> > From: Mark.Donaldson AT cexp DOT com
> > To: kfhemness AT ucdavis DOT edu, veritas-bu AT mailman.eng.auburn DOT edu
> > Subject: RE: [Veritas-bu] Examples of SSO vm.conf files
> >
> > It's not vm.conf, it's tpconfig.
> >
> > Be sure which drives are the shared ones, ie /dev/rmt/x on server1 is
> > /dev/rmtY on server2.  Then carefully setup the drives as shared drives
> via
> > tpconfig.
> >
> > vm.conf is plain.
> >
> > Really, the manual is your friend on an SSO setup.
> >
> > -M
> >
> > -----Original Message-----
> > From: veritas-bu-admin AT mailman.eng.auburn DOT edu
> > [mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu]On Behalf Of Kathryn
> > Hemness
> > Sent: Friday, January 27, 2006 2:26 PM
> > To: veritas-bu AT mailman.eng.auburn DOT edu
> > Subject: [Veritas-bu] Examples of SSO vm.conf files
> >
> >
> > Greetings -
> >
> > I'm trying to setup SSO for an LTO2 library shared between a Solaris 9
> > Master and a RHEL3 Linux Media server.  Can someone give me examples of
> > the vm.conf files on each server?
> >
> > Right now, I'm using an evaluation license and I can see drives
> > on both Master and Media servers and the robotic is controlled
> > by the Master.  However, all of the traffic is still going through
> > the Master server.  The Master server has a vm.conf but my Linux
> > media server doesn't.
> >
> >
> > --kathy
> > _______________________________________________
> > Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> >
>
> --kathy
>
> ============================================================================
> ===
> Kathryn Hemness                        kfhemness AT ucdavis DOT edu
> System Administrator                   phone: 530.752.6547
> Campus Data Center & Client Services   fax:   530.752.9154
> _______________________________________________
> Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>

--kathy

===============================================================================
Kathryn Hemness                        kfhemness AT ucdavis DOT edu
System Administrator                   phone: 530.752.6547
Campus Data Center & Client Services   fax:   530.752.9154