There is probably a reason the drive is going down, any SCSI diagnostic
codes?

Have you called your representative of the robot/drive and ask them what
the diagnostic / error messages mean?



-----Original Message-----
From: veritas-bu-admin AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of Williams,
Kristopher L
Sent: Wednesday, September 28, 2005 11:30 AM
To: Veritas List
Subject: [Veritas-bu] Tpautoconf -t

 
Hello all,

I have 4 tape drives showing up on a Windows host. They all show up in
device manager and all show up under netbackup when I run tpautoconf -t.

Now one of the drives has gone down and can not be up'ed or reset. I run
tpautoconf -t again and the drive is now gone. In Device manager, the
all 4 drives are still on the host.

Is there a command to rescan drives so that it will show up under
tpautoconf -t?


Thanks,

Kris

_______________________________________________
Veritas-bu maillist  -  Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu