You'll need to perform the upgrade to FP6. (Or go to 5.x)
-Tim
On Jul 13, 2005, at 8:29 AM, Duffy, Laura wrote:
>
> We have locally installed a linux client with NetBackup-RedHat2.4
> 4.5MP6 and are getting the following error when doing a telnet to the
> client on port 13782
>
> - Incorrectly built binary which accesses errno or h_errno directly
>
> Our master server is running on NBU 4.5 MP6 platform: HPUX 11i
>
> We have been told that Red Hat Enterprise Linux AS release 3 (Taroon)
> is only supported with the 4.5 FP6 version of NBU, not 4.5 MP6.
>
> Has anyone else experienced this problem?
> Do we have to reinstall Netbackup Master Server with 4.5 FP6
> (apparently FP6 is a re-install).
> Anyone out there have any ideas?
>
> Regards,
> Laura.
>
>
> ======================================================
> This email and any attached files are confidential and may be legally
> privileged. It is intended solely for the addressee. Access to this
> email by anyone else is unauthorised. If you are not the addressee,
> any disclosure, reproduction, copying, distribution, or other
> dissemination or use of this communication is strictly prohibited. If
> you have received this transmission in error please notify the sender
> immediately (you can send an email to emailadmin AT iibbank DOT ie) and then
> delete the email. Alternatively in emergencies you can telephone our
> email processing center at ++353 1 6646600. This center will only
> process calls relating to email delivery/non delivery.
>
> Email transmission cannot be guaranteed to be secure or error free as
> information could be intercepted, corrupted, lost, destroyed, arrive
> late or incomplete, or contain viruses.The sender therefore does not
> accept liability for any errors or omissions in the contents of this
> message, and shall have no liability for any loss or damage suffered
> by the user, which arise as a result of email transmission.If
> verification is required please request a hard copy version.
>
|