Hi dears,

Could I configure Netbackup Master Server to response with 2 IP´s diferent 
network address?
Remembering: The 2 networks are not communicated.
But, the NBU Master Server is configured in bp.conf to response with name 
sp1bkpclusx01 at 10.128.251.3.
All client´s I'm using the parameter REQUIRED_INTERFACE in bp.conf as  the 
network backup interface installed in client server.
Example the error:
When the start backup of the client (10.128.3.10/24) the NBU Master tries to 
connect  for IP address 10.128.251.3/24. I verified this problem through the 
command netstat -an.

Bellow, ifconfig output the NBU Master Server:
   hme0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
       inet 10.128.3.8 netmask ffffff00 broadcast 10.128.3.255
       ether 0:0:e:25:2d:cd
  mpnet0: flags=1000863<UP,BROADCAST,NOTRAILERS,RUNNING,MULTICAST,IPv4> mtu 
1500 index 3
       inet 10.128.251.3 netmask ffffff00 broadcast 10.128.251.255
       ether 0:0:e:25:2d:cd

Regards