[Veritas-bu] L700 StorageTek Question w/Veritas
2005-05-17 14:35:33
Subject: |
[Veritas-bu] L700 StorageTek Question w/Veritas |
From: |
juanino AT yahoo DOT com (Jerry) |
Date: |
Tue, 17 May 2005 11:35:33 -0700 (PDT) |
Are they fibre to the Solaris host, or fibre into a
SAN?
--- "Piszcz, Justin" <jpiszcz AT servervault DOT com> wrote:
> I am using an L700 tape library.
>
>
>
> 5- STK9840 drives
>
> 4- HPUltrium2-SCSI Drives
>
>
>
> All drives connect via fiber.
>
> The host is a SunOS 5.8 box running Veritas
> NetBackup 5.1.
>
> There is something going on with the Fiber+I/O Port
> Configuration.
>
> Basically a couple weeks ago the first four STK9840
> tape drives went
> down (in veritas: DOWN/TLD) when Veritas tries to
> write to these tape
> drives.
>
> We get "I/O port error cannot open port."
>
>
>
> I thought it was an issue with the drives.
>
>
>
> I changed the fiber loop for the A/B addresses for
> the four STK9840
> drives to 02/02, 03/03, 04/04, 05/05.
>
> After I did this, four of the drives came up
> successfully but then four
> other drives went down.
>
>
>
> Does anyone know the key to setting the fiber
> addresses?
>
>
>
> The panel says:
>
>
>
> 1-125 for HARD PORT (this is what I am using)
> 126 for SOFT PORT (this disables the port)
>
>
>
> Are there any StorageTek technicians or users of the
> L700 who may have
> had similar problems in the past?
>
>
>
> Thanks!
>
>
>
> Justin.
>
>
>
>
>
>
>
>
__________________________________
Yahoo! Mail Mobile
Take Yahoo! Mail with you! Check email on your mobile phone.
http://mobile.yahoo.com/learn/mail
|
|
|