[Veritas-bu] Inserting Tapes into a Robot
2004-12-07 15:17:39
Subject: |
[Veritas-bu] Inserting Tapes into a Robot |
From: |
david.chapa AT adic DOT com (David Chapa) |
Date: |
Tue, 7 Dec 2004 13:17:39 -0700 |
Except vm commands aren't case sensitive.
David A. Chapa | ADIC | 720.272.8452 cell | http://www.adic.com
Sr. Technical Advisor
-----Original Message-----
From: Tim Hoke [mailto:thoke AT northpeak DOT org]
Sent: Tuesday, December 07, 2004 1:05 PM
To: Jennifer Hooper
Cc: David Chapa; veritas-bu AT mailman.eng.auburn DOT edu
Subject: RE: [Veritas-bu] Inserting Tapes into a Robot
use lowercase tld
On Tue, 7 Dec 2004, Jennifer Hooper wrote:
> Hrm... everytime I try that it tells me "robot type TLD is not
supported by
> vmupdate" or somesuch. I'm still digging through the admin guide.
This is
> Solaris 7, and NBU 5.0. Didn't mean to send that before I got that
out
> there.. but I got distracted.
>
> Thanks,
>
> Jen
>
> _____
>
> From: David Chapa [mailto:david.chapa AT adic DOT com]
> Sent: Tuesday, December 07, 2004 11:13 AM
> To: Jennifer Hooper; veritas-bu AT mailman.eng.auburn DOT edu
> Subject: RE: [Veritas-bu] Inserting Tapes into a Robot
>
>
> /usr/openv/volmgr/bin/vmupdate -rn $ROBNUM -rt $ROBTYPE -empty_ie
>
> David A. Chapa | ADIC | 720.272.8452 cell | <http://www.adic.com>
> http://www.adic.com
> Sr. Technical Advisor
> Pathlight VX - http://www.adic.com/gopathlightvx
>
>
>
> -----Original Message-----
> From: veritas-bu-admin AT mailman.eng.auburn DOT edu
> [mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of Jennifer
> Hooper
> Sent: Tuesday, December 07, 2004 11:55 AM
> To: veritas-bu AT mailman.eng.auburn DOT edu
> Subject: [Veritas-bu] Inserting Tapes into a Robot
>
> Hi Guys -
>
> I've been playing around with this for a while now, and I can't
get it
> to work. I have a tape that I made a full backup of a server on this
> weekend. I ejected the tape to send offsite, but need to make a copy
of an
> image first. How do I reinject that tape back into the library so
that it
> can see it to copy the data? The tape is in the CAP to be imported.
I even
> tried importing an image through the catalog, and that didn't work
either.
>
>
> Thanks in advance,
>
>
> Jennifer
>
|
|
|