[Veritas-bu] NetApp NDMP over SAN
2004-11-11 17:35:25
Subject: |
[Veritas-bu] NetApp NDMP over SAN |
From: |
thoke AT northpeak DOT com (Tim Hoke) |
Date: |
Thu, 11 Nov 2004 16:35:25 -0600 (CST) |
As long as it still comes up to the NetApp as the same device, NetBackup
wouldn't care.
And I thought I heard somewhere that VERITAS had SSO on the roadmap for
NDMP... But I could be off on that... Check with your local reps to see
for sure.
-Tim
On Thu, 11 Nov 2004, Sto Rage© wrote:
> Are you sure? I don't think its as simple as changing the zoning.
> What happens to the config on the media server controlling the library?
>
> On Thu, 11 Nov 2004 13:21:00 -0800, Kennedy, Jeffrey
> <jkennedy AT qualcomm DOT com> wrote:
> > It's a lot easier to re-allocate if necessary. For instance if the
> > bridge goes out or the drive takes a dirt nap all you need to do to
> > still get backups over fc is change the zoning.
> >
> > ~JK
> >
> >
> >
> > -----Original Message-----
> > From: veritas-bu-admin AT mailman.eng.auburn DOT edu
> > [mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of Sto
> > Rage(c)
> > Sent: Thursday, November 11, 2004 11:41 AM
> > To: bryan_bahnmiller AT agilent DOT com
> > Cc: veritas-bu AT mailman.eng.auburn DOT edu
> > Subject: Re: [Veritas-bu] NetApp NDMP over SAN
> >
> > We have something similar, but note that...
> > Veritas doesn't support SSO on NDMP drives, you will have to dedicate
> > the tape drives exclusively to the Netapp. So why connect via the
> > switch?
> > We have it this way,
> > R150-->STK SN3250-->2 drives on STK L700 (LTO-1)
> > hope this helps
> > -G
> >
> > On Thu, 11 Nov 2004 11:17:26 -0700, bryan_bahnmiller AT agilent DOT com
> > <bryan_bahnmiller AT agilent DOT com> wrote:
> > > All,
> > >
> > > We are looking at bringing a NetApp FAS270 into our tape SAN. Our
> > current tape SAN has Windows and HPUX hosts connected through an EMC
> > Connectrix ED64M (McData 6064) to ADIC Pathlights to IBM LTO1 drives in
> > a Scalar 10K.
> > >
> > > NetApp states that:
> > >
> > > FAS270 --> Brocade --> Pathlight --> LTO drives (in a 10K)
> > > and
> > > FAS270 --> McData --> Scalar I2K
> > >
> > > are both certified.
> > >
> > > Has anyone done this with the EMC re-badged McData?
> > > FAS270 --> EMC 64M --> Pathlight --> LTO drives (in a 10K)
> > >
> > > We will try it as soon as we get a loaner FAS270 in, but I am curious
> > if anyone else has done this before.
> > >
> > > Thanks,
> > > Bryan
> > >
> > > Bryan Bahnmiller
> > > Agilent Technologies
> > > Colorado Springs, CO
> > > bryan_bahnmiller AT agilent DOT com
> > >
> > > _______________________________________________
> > > Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
> > > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> > >
> > _______________________________________________
> >
> >
> > Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
> > http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
> >
> >
> _______________________________________________
> Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
> http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
>
|
|
|