[Veritas-bu] Drive Type for LTO 2
2004-07-06 22:51:33
LTO2 is hcart2 specifically. But the robot type may be DLT.
-Dwayne Adams
-----Original Message-----
From: veritas-bu-admin AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu] On Behalf Of
Mark.Donaldson AT cexp DOT com
Sent: Tuesday, July 06, 2004 2:21 PM
To: Kenneth.Lee AT sbs.siemens DOT com; Veritas-bu AT mailman.eng.auburn DOT edu
Subject: RE: [Veritas-bu] Drive Type for LTO 2
Drive types for LTO-type tapes is usually HCART (half-inch cartridge).
-M
-----Original Message-----
From: veritas-bu-admin AT mailman.eng.auburn DOT edu
[mailto:veritas-bu-admin AT mailman.eng.auburn DOT edu]On Behalf Of Lee,
Kenneth
Sent: Tuesday, July 06, 2004 1:25 PM
To: 'Veritas-bu AT mailman.eng.auburn DOT edu'
Subject: [Veritas-bu] Drive Type for LTO 2
I've just installed an Overland NEO 4100 tape library (HP-LTO2 drives).
During NetBackup device configuration, it asked for drive type and the
options were ½ cartridge, 8mm cartridge, DLT cartridge, DTF cartridge and
unknown. Am I supposed to use DLT? Should there be a drive type for LTO2?
If yes, what do I need to do to get drive type LTO2 to show up?
Thanks for you help!
Ken
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
_______________________________________________
Veritas-bu maillist - Veritas-bu AT mailman.eng.auburn DOT edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
|
|
|